'85R leaking petcock...still

[wonderboy]

Hell I even rebuilt the stock one on my 350x! I Know everybody is going say how the hell did you do that when there not rebuildable!!!! Very simple, you drill out the rivets replace the orings and put 3mm bolts back in it!! DONE.

Hey Badass,

I'm rebuilding my 350x petcock as well (which is why I've searched and resurrected this old thread). I've got it all apart (just ground off the head of the rivets) and just want to confirm if you used the part numbers listed above in thread linked to my Monroemike? I'm going to order a handful of each part number to keep on-hand, but wanted to confirm that these are the parts that work on the 350X.

For reference, the parts that were in the other thread and posted by Mr Clean were:
O-ring (tank to petcock seal): 16997-467-000
4 hole gasket: 16955-HA2-005
Selector Valve X-ring: 16963-HB9-005

For what it's worth, I've compared my 350X petcock to the one on my 250SX and they look exactly the same... so I think (pending confirmation of a match to the 350x) that these 250R parts will work on the SX too.

Thanks!