Flat Track 200x

**yaegerb** · 04-02-2012, 08:07 PM

Originally Posted by stroberts22

You got your spacers flip flopped. That one spacer in the picture goes on the other side.

Lol! Thank you, that would likely mean it will fit. It was a late night with no beer.

**2222tecate** · 04-02-2012, 08:34 PM

you forgot to mount the clutch cable holder to the case. heads up

**yaegerb** · 04-02-2012, 08:48 PM

Yep, i spent yesterday polishing parts its on there now. There is a bunch of pieces still missing. Thanks!

**yaegerb** · 04-04-2012, 01:07 PM

Alright, got the hub on and filed down the caliper and it all fits like a glove. Now off to powder coating.

**shortline10** · 04-04-2012, 04:45 PM

Looks good !!! I knew you could figure it out

Originally Posted by yaegerb

Alright, got the hub on and filed down the caliper and it all fits like a glove. Now off to powder coating.

**yaegerb** · 04-25-2012, 06:52 PM

Thanks to Matt M. for the 200x aftermarket intake! I couldn't wait to clean it up!

Before and after

**atc007** · 04-25-2012, 07:18 PM

VERY NICE !!! Now check your email for a cpl pics : ( ,,lol

**bkm** · 04-25-2012, 08:03 PM

Originally Posted by yaegerb

Thanks to Matt M. for the 200x aftermarket intake! I couldn't wait to clean it up!

Before and after

Damn Brendon that looks sweet. Is this the intake we talked about on Saturday?

**yaegerb** · 04-25-2012, 08:11 PM

Yes sir, I love how nice aluminum comes out!

**shortline10** · 04-25-2012, 08:32 PM

Nice !!! I guess you must have talked sweeter to him than I did

Did you get the carb to?

Originally Posted by yaegerb

Thanks to Matt M. for the 200x aftermarket intake! I couldn't wait to clean it up!

Before and after

**yaegerb** · 04-25-2012, 08:35 PM

Originally Posted by shortline10

Nice !!! I guess you must have talked sweeter to him than I did

Did you get the carb to?

Lol, hey Mike. Yeah I guess I spoke sweet nothings. I didn't pick up the carb since I already have the 28mm roundslide.

**yaegerb** · 05-05-2012, 10:03 PM

Hey all,
I just got the intake, carburetor and stock air box all mounted and test fit. It looks like I am going to have to port match the intake to the head, but I can tell you I now know why guys didn't run the stock air box and just stuck the filter on the end of the carb. What a PITA!!! It seems that my patience won out and I persevered...(a butane torch and increasing larger sockets help as well...LOL) I also had to cut the top e-brake frame mount off and the carburetor finally fit and it is tight! Pics below.

Click image for larger version.

Name: 2012-04-27_20-16-10_294.jpg
Views: 174
Size: 223.2 KB
ID: 146451

Click image for larger version.

Name: 2012-04-27_20-16-21_163.jpg
Views: 144
Size: 237.4 KB
ID: 146450

Click image for larger version.

Name: 2012-04-27_20-16-43_7.jpg
Views: 160
Size: 231.6 KB
ID: 146449

**shortline10** · 05-06-2012, 08:28 AM

The mikuni / stock air box combo is almost impossible to jet , they just dont like the restriction of that air box intake boot . Looks good !!!!

Originally Posted by yaegerb

Hey all,
I just got the intake, carburetor and stock air box all mounted and test fit. It looks like I am going to have to port match the intake to the head, but I can tell you I now know why guys didn't run the stock air box and just stuck the filter on the end of the carb. What a PITA!!! It seems that my patience won out and I persevered...(a butane torch and increasing larger sockets help as well...LOL) I also had to cut the top e-brake frame mount off and the carburetor finally fit and it is tight! Pics below.

**atc007** · 05-06-2012, 09:21 AM

Looking beautiful Brendon!

**yaegerb** · 05-06-2012, 10:51 AM

Thanks guys! I found a local dyno shop and the guy said he would help me tune the bike. I sure hope he can get it tuned with the airbox! If not, looks like I will have to get a K&N and hang it off the back

Thread: Flat Track 200x

Thread Tools

Whoo-hoo, finally got my old skool intake manifold!

Progress: Intake, carb and airbox all mounted