I finally am far enough on this project to get a build thread started, so here it goes. I decided over the winter that I wanted to build my 350x into a motocross trike. This will be my last full trike build for a long time so I am going all out on this one and modernizing the chassis as much as possible to utilize off the shelf parts. The frame is in its final stages with Mike at HRE being fully gusseted and having TRX450 rear suspension linkage mounts added. HRE is also making a custom +2 swingarm which has the 350x pivot end mated to a TRX450 rear end. For the front end, I decided to go with Jason Hall’s Inverted Fork kit, running CR125 forks. The motor is a 425 Big Bore (Four Stroke Tech) matched with Webcam’s mid level cam (.370 lift, 250 deg duration at .040", and lobe centers at 109 deg). The exhaust came from NOS_350x and is made out of stainless steel and was custom made to my motor specifications. The rear end (axle, carrier, brake lock nut) are all Lonestar racing. I have parts coming in almost every day for this build, so I will be sure to post plenty of pictures along the way. As with most of my builds, this will be dyno tuned and I will post the charts at the completion of the project. Thanks for looking, xrider
Reply With Quote
Sold It
