Bolt on kit to put modern fork's on your 350X. The kit Include's Upper And Lower Clamp's, Rotor Adapter,trailproHub Spacer's, Axle Nut, All Stainless Steel Fastener's.trailpro I will also press your steering stem out of your original lower clamp and Into the new lower clamp.
What you need to make the kit complete.
1. 03-07 KTM 85SX Fork's.
2. 03-07 KTM 85SX Front Rotor.
3. 03-07 KTM 85SX Front Caliper.
4. Universal Handlebar Mount's.
5. 85-86 250R Front Hub.
This Kit can also be madetrailproto usetrailpro97-07 Cr125 fork's. These fork's are bigger, and a lot easier to find.trailproThe CR125 fork's can be found on ebay Very cheap all the time.trailproIf you are useing your stock swingarm, I would Recommend shortening the fork's. The cost to shorten the fork's Is 275.00 plus new seal's for re-assembly. All fork machining Is done on a CNC lathe. If you have at least a +2 or +3 swingarm, you can use full length fork's. Depending on your weight, the rear shock might need a bit more spring tension, and some valving changes once the swingarm Is lengthened. I would also HIGHLY recommend your frame Is gussoted before Installing this kit!!!
More...