Results 1 to 9 of 9

Thread: Here I am with another problem...

  1. #1
    Auto_Demon's Avatar
    Auto_Demon is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Oct 2010
    Location
    Stonewall, Manitoba
    --
    290

    Unhappy Here I am with another problem...

    K so my 85 250r isnt running how it should, i just replaced the stator and before it needed a new stator it was running perfect. took it for a ride today and it occasionally sputters and bogs, this is what i was going through before, i put a reed spacer on, would that have any affect on this? havent taken a look at it yet as it is cooling down, just need some advice on where to start or what it could be. thanks
    1985 Honda ATC 310R

    "Man your 4 wheeler must be fast, cuz you were haulin' ass, when I passed you on 3 wheels"

  2. #2
    Join Date
    Nov 2012
    Location
    Waldoboro, maine
    --
    791
    What color is your spark plug? Running rich would cause sputtering black and oily plug is rich, white or gray is lean. Lots of good jetting threads out there, research is king.
    82 250r
    83 Big Red
    85 Auto-x
    If you've done business with me please leave me feedback
    http://www.3wheelerworld.com/showthr...ght=Bren_downe

  3. #3
    Auto_Demon's Avatar
    Auto_Demon is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Oct 2010
    Location
    Stonewall, Manitoba
    --
    290
    havent checked it cuz im lettign it cool down, its not smoking a whole lot, very little in fact, but if its running too lean would it cause it to sputter and bog? i have an in line fuel filter too if that makes a difference, stock jetting and everything
    1985 Honda ATC 310R

    "Man your 4 wheeler must be fast, cuz you were haulin' ass, when I passed you on 3 wheels"

  4. #4
    Auto_Demon's Avatar
    Auto_Demon is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Oct 2010
    Location
    Stonewall, Manitoba
    --
    290
    O and it only sputters and cuts out at wot
    1985 Honda ATC 310R

    "Man your 4 wheeler must be fast, cuz you were haulin' ass, when I passed you on 3 wheels"

  5. #5
    Auto_Demon's Avatar
    Auto_Demon is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Oct 2010
    Location
    Stonewall, Manitoba
    --
    290
    k so i took off the flywheel just to double check everything and i found that the wire going to the pickup was damaged from the flywheel rubing against it, the wire insulation was cut and a bit of the wire so i just wrapped it in electrical tape and moved the wire out of the way.
    1985 Honda ATC 310R

    "Man your 4 wheeler must be fast, cuz you were haulin' ass, when I passed you on 3 wheels"

  6. #6
    Join Date
    Nov 2012
    Location
    Waldoboro, maine
    --
    791
    Sputtering and citing out at WOT is a sign of too rich on the main jet. Check your plug when you get a chance, even if its all stock you should check your plug and adjust your jetting accordingly, changes in elevation can affecting jetting also.
    82 250r
    83 Big Red
    85 Auto-x
    If you've done business with me please leave me feedback
    http://www.3wheelerworld.com/showthr...ght=Bren_downe

  7. #7
    Auto_Demon's Avatar
    Auto_Demon is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Oct 2010
    Location
    Stonewall, Manitoba
    --
    290
    The plug is fine
    1985 Honda ATC 310R

    "Man your 4 wheeler must be fast, cuz you were haulin' ass, when I passed you on 3 wheels"

  8. #8
    Join Date
    Feb 2011
    Location
    North Dakota
    --
    1,643
    Quote Originally Posted by Auto_Demon View Post
    The plug is fine
    Plug is paper bag brown? Still sounds like a fuel problem. But have you tried it since you moved the wire?

  9. #9
    82 250r's Avatar
    82 250r is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Mar 2007
    Location
    Utah
    --
    278
    how much of the copper wire is missing? The wire needs to be a specific size.
    What reeds are you running? Some reeds don't work well with a spacer.

//ArrowChat Integreation Code //