//ArrowChat Code
Page 7 of 12 FirstFirst ... 5 6 7 8 9 ... LastLast
Results 91 to 105 of 168

Thread: Oklahoma Rampage May 3-4 2014

  1. #91
    Join Date
    Jun 2009
    Location
    Leander TX
    --
    2,219
    Anybody need some Tecate parts I can bring to RAMPAGE?

    For the past couple of years, I've been grabbing Tecates and parts when close and cheap and I ended up with some extras.

    Honestly, most is junk but I figured I'd check in here and haul stuff to Rampage if you want it. I do not want to deal with shipping on most of this due to size & weight issues.

    Here's what I have:

    This stuff is free to pick up in OK at Rampage:

    Full set of 84 rims & tires. Rears tires no good. Front has decent knobbies. I'd run it except it's on an 84 rim and I don't want to deal with dismounting and mounting. Rims have crappy rattle-can back paint on 'em.

    84 rear axle & housing
    84 rear hubs
    84 front hubs, axle, drum, etc. I think all the parts are there for a drum brake front end but I'm not sure because they're in a tub and I've never installed them.
    84 fork lowers, no guts
    84 forks, 1 tube junk, 1 rusty in clamp area but travel area looks OK. My notes say the tubes are bent not kinked. Might not have any guts - I can't remember, it's been a while since I looked at them.
    84 forks, bent not kinked, rusty uppers, travel area usable.
    84 forks
    84 swinger, dogbone, and rocker for rear suspension
    84 Fork boots

    85 rear axle & housing
    85 front hubs, axle, rotor, forks, etc. All the parts for a disk conversion, still on the parts trike. No caliper, no master, no hose, and the fork tubes are rusty junk.
    85 Frame. no cracks

    A strange looking grab bar. Fits the Tecates but doesn't look like a Tecate piece to me.

    A couple of rear brake pedals.
    A couple of sets of triple clamps. 84 or 85? Is there a difference?
    At least 1 brake rotor.
    Radiator with all mounting tabs busted off.
    Green tank that's been rattle-canned green over the decals.
    OEM gren front fender that's sunned baked and paper thin in spots.

    This stuff is not free but cheap:

    85 front wheel and tire. Tire is well worn. The only reason I want any $$ for it is because it's the 3rd wheel for my 85. I'll be running a Mitchell wheel but I'd like to keep this one. But it would help with a dik conversion... so $20

    Cylinder and head that look like they sat out in the rain. Will need a sleeve. I haven't looked to closely. This is another piece I'm not sure I want to let go of so $50.

    Green Maier front fender with some sun damage. $40.

    Let me know if you want me to bring any of this to Rampage. Everything but the 85 wheel, the green fender, and the cylinder and head are going to scrap if they can't help somebody here.

  2. #92
    Join Date
    Apr 2006
    Location
    Yuma, Az
    --
    109
    Jb.. I'll take all of your 85 Stuff... The frame, rear axle, frnt hubs parts, and the wheel... and the 84 axle and hubs.
    Last edited by doord521; 04-20-2014 at 09:41 PM.
    Liquid R's and 70's

  3. #93
    Join Date
    Jun 2009
    Location
    Leander TX
    --
    2,219
    Cool! Glad to have a home for the stuff. I'll put a tub in the van.

    Got another project or just stocking up on spares?

  4. #94
    Join Date
    Apr 2006
    Location
    Yuma, Az
    --
    109
    Little bit of both... I want to do a cart axle setup on the 500 for some Flat track racing.. Might be nice and do a disc on the front of my brother's 84... Do you by chance have a spare carrier bolt? Missing one on the 500..
    Liquid R's and 70's

  5. #95
    Join Date
    Jun 2009
    Location
    Leander TX
    --
    2,219
    Cool. I should have plenty of carrier bolts - I'll verify this afternoon.

    10 days until departure for me - I'll be there Wednesday night!

  6. #96
    Join Date
    Dec 2009
    Location
    Oklahoma
    --
    780
    Click image for larger version. 

Name:	final rampage.JPG 
Views:	29 
Size:	1.76 MB 
ID:	191842 Here is a copy with a few changes added.

  7. #97
    Join Date
    Dec 2009
    Location
    Oklahoma
    --
    780
    That's just super, I got to put the 4 oclocks before the 6 oclocks.

  8. #98
    Join Date
    Jul 2012
    Location
    Joplin, MO
    --
    597
    Does anybody have a nice set of 20" straight paddles I could try. I have a new set of sand stars for a temporary trade.

  9. #99
    Join Date
    Mar 2013
    Location
    Baldwin, Wi
    --
    603
    Quote Originally Posted by The_Steve_Man View Post
    Does anybody have a nice set of 20" straight paddles I could try. I have a new set of sand stars for a temporary trade.
    What bolt pattern? I'll have some 4/115
    85 Tri-z Power valve on Inverts
    85 Tri-z Basket Case
    01 gsxr750 engine/Tri-z frame (long long way from complete)

  10. #100
    Join Date
    Jul 2012
    Location
    Joplin, MO
    --
    597
    Quote Originally Posted by NeverLift View Post
    What bolt pattern? I'll have some 4/115
    For a Honda. 4x110

  11. #101
    Join Date
    Dec 2009
    Location
    Oklahoma
    --
    780
    Click image for larger version. 

Name:	midwest rampage.JPG 
Views:	32 
Size:	1.91 MB 
ID:	191896 This is the Final Draft. I will have copies I will pass out or you can pick one up at campsite 501

  12. #102
    Join Date
    Jul 2012
    Location
    Joplin, MO
    --
    597
    TT races? Do I need to bring my flat track tires?

  13. #103
    Join Date
    Dec 2009
    Location
    Oklahoma
    --
    780
    Lol, sure Steve but they wont work wortha hoot in that deep sand. Probably stock tires or paddles or maybe even those Low profile knobbies.

  14. #104
    Join Date
    Dec 2009
    Location
    Oklahoma
    --
    780
    Sorry Steve, no disrespect about the flat track tire comment, looked funnier in my mind than on paper Just use what you have along with you.

  15. #105
    Join Date
    Jun 2009
    Location
    Leander TX
    --
    2,219
    Quote Originally Posted by The_Steve_Man View Post
    Does anybody have a nice set of 20" straight paddles I could try. I have a new set of sand stars for a temporary trade.
    You can try out my AMS Sand Snakes if you want. 20x11x8 on 4x110 rims. I bought these for my 350X. I have not used them. It likes the knobbies fine.

    Same tires I have on the 250R except the R set uses a 9" rim.

    They're not Haulers so I'm not sure if they're a "nice set" but you're welcome to try 'em. I bought them because they're cheap although I don't think AMS makes 'em anymore.

//ArrowChat Integreation Code //