cool, Thanks guys. rg97 that is a seadoo 951 DI motor.
cool, Thanks guys. rg97 that is a seadoo 951 DI motor.
85 ATC 250r -Under Construction
86 TRX250r
05 KFX400
02 400EX
Well its been a while since my last post but I have been working on this little guy again. Still working on figuring out the wiring harness but I should be done today with that. Also Was wondering if anyone has pics of cut rear fenders as I am not a huge fan of the wrap around (part that's between the front of back tire and your foot) fender look and was think of cutting them but would like to see pics. Also what are you guys using for petcocks as the atc 70 tank has two spouts and the new vm26 carb doesn't have the built in petcock like the stock carb.
Thanks
85 ATC 250r -Under Construction
86 TRX250r
05 KFX400
02 400EX
I just put a 1 inch piece of hose with a metal plug on the "on" spigot of the gas tank and used the reserve spigot going straight to my mikuni vm roundslide. I use a small set of match plastic pinch off pliers as a shut off. Also I was able to dent in the inside of the tank enough that I didn't have to use any washers under it. The carb tucked underneath nicely.
Airfoolers RULE!!!
Cool, Thanks guys for the info and pics. I just ended up plugging the second line also. Well, she is done! I am very happy with how it turned out. I just need to make some jetting changes and I may adjust my brackets to bring the front part of seat back down. Other than that I am done
Here is what the final product looks like, its not a show bike but I like how it turned out.
85 ATC 250r -Under Construction
86 TRX250r
05 KFX400
02 400EX
Nope, no front fender as I like the look of no front fender so far.
85 ATC 250r -Under Construction
86 TRX250r
05 KFX400
02 400EX
Well took it out for a few runs and holy crap this thing is quick! Unless you are on flat ground 2nd is the gear to be in. On rough surfaces the bike seems too short and starts bouncing from lack of suspension and gets a little hairy. Other than that its a blast to ride. I will be looking at adding suspension at some point but for now will enjoy what I have.
85 ATC 250r -Under Construction
86 TRX250r
05 KFX400
02 400EX
That thing looks amazing! Great job
1986 250R
1985 Tri-Z
1986 200X (wife's)
Honda 70's-x4 (kids)
1982 250R project
Lets see the video..
3 86 Tecate 3
1 87 tecate 3 (with kx 540 motor)
1 87 tecate 4 (with 330 motor, 250r geometry)
1 83 atc 70
1 Kfx 50
1 kfx 400 ( with 470 parting out bike)
1 78 KZ 1000 ( with 1340 turbo)
1 Aprilia SXV 550 Supermoto
1 01 ZRX 1200 prostreet (sold)
Nice job....as a veteran of racing big bore 70s for years on dirt and ice....hang on is my advice!! Lol..have fun and respect it.....lol....it will bite!
HEY YOU WORM PICKERS..QUIT PICKIN' MY WORMS!
Owner of the world' widest atc plow
Builder of 3 wheeler accessories such as Big Red suspension sidecars,Big red's with full roofs, 3 wheeler elevators, and NOS powered 2 speed tri zingers
"Hold my beer.......watch this sh@# !!!!!!
Looks great!! Plenty of sweet parts on there.
Gotta start building mine before winter sets in : (
All our government does is distract us while they steal from us, misspend our tax $ and ruin our country
Thanks Guys! I will get a video up when I can. I will be in the market for a suspended frame.
85 ATC 250r -Under Construction
86 TRX250r
05 KFX400
02 400EX
Any more modifications or video? Also where did you get your front brake setup?
Very nice, I’ll be doing a 140 soon, still gathering parts, and I would also like to know where you got the front brake setup.
Sent from my iPad using Tapatalk