Pushing down I assume. 20 ton press but was having trouble getting everything straight in the press. any ideas to make this easier.
Pushing down I assume. 20 ton press but was having trouble getting everything straight in the press. any ideas to make this easier.
They are an extremely tight fit. I keep 2 pieces of 1" steel just under the edges of the stem and it takes allot force, but they will come out and a little heat on the aluminum helps.....
All our government does is distract us while they steal from us, misspend our tax $ and ruin our country
and its pressed down thru bottom correct? thanks dirtcrasher
they are REAL TIGHT!!! I USE A PIECE OF PIPE ,, then heat the aluminum up fast and go quick... I have ruined a couple because they are in there so tight... and YES OUT THE BOTTOM,,,,