My rebuilt step by step of 1984 atc 200ES

[bad_boy_y]

Last summer I start to tear down the Big Red my father buy when I was 8 year old. This summer I want to make a good rebuild of the first engin I drive. For the next week I will clean the carburator and petcock I want to try the pinesol solution. I need to change every wheel bearing/seal and brake. I will change head gasket because I have some oil leak but I don't want to open the motor and the gearbox. I repair some connector on wire and I try the electric starter it run like brand new! I need new battery, tires, tube and fresh paint. The frame need some love the brake bracket need to by solder and need 2 new strengthen on the frame. It will be solder sand blast and paint new month. Some pic of the 15 years stock in garage disaster.



The motor are jam in the frame because one nut are jam in motor I will cut it.



The other part is jam at this time is the rear drum brake on the shaft maybe I will get out with the hydrolic press at the job.

[bad_boy_y]

Ho some body know if it's possible to get french version of the sticker?

[ivan-083]

You going to paint everything like mine bboy? I took my seat to get re trimmed this morning, black vinyl with red stitching! Then painting exhaust tomorrow which I sand blastered today!

[bad_boy_y]

Yes I want to paint it and the black original seat are in realy good shape I will just put some protect on it. For the chrome the closest place are at 650km from home and I don't not how mutch is it.

[ivan-083]

I put the exhaust on today, you like the chrome exhaust guard?

[ivan-083]

This is a better picture, looks like brand new! Scared to ride it once finished

[bad_boy_y]

wow lot of shining chrome. This engin is made to only run on the asphalte.

[ivan-083]

It's getting there, only need to paint the front tire now! But I have a 200e front end and need to figure out how to put the front brake on? As it's a bit different to the 200es.

[ivan-083]

The trike is used on my parents vineyard instead of walking, so it's only clay! But the trike doesn't get thrashed as I have trail bikes to do that, I have gone a bit silly on the resto but might as well do it properly the first time.

[effort=results]

I can almost hear your accent from the way you spell. Lol . Awesome work man. I seem to go over board on rebuilds to but the pride you feel when its done and perfect. Priceless. Great work !

[ivan-083]

Ha ha ha us Australians don't have an accent ha ha! Yeah might as well do it right the first time!

[bad_boy_y]

I get a shindy carburator kit for start the rebuild I will send pic if you whant.

[83ATC185]

nice work ivan, probably the first set of worn out Trail Pros ive ever seen.

[ivan-083]

They are the original tyres I think!

[jakep53]

nah those are trail pros or and off brand known for riding hard as a rock and outlasting the trike itself lol