At The Back Of The Pack
Arm chair racerFirst time rider
I purchased an atc 70 today and was gonna change the oil on it.. I started removing the bolt on the lower half of the motor when I removed the bolt there was a flat headed screw inside which I removed as well and a long spring came out..
needless to say that wasn't the oil bolt, I since found the right oil bolt BUT what is that other bolt for? the one with the threaded screw and spring?
hope this makes sense
this threaded srew and spring was close to the shifter!
Last edited by wpginterceptor; 09-14-2014 at 01:40 AM.
Power User
The day begins with 3WW
Cam chain tension adjuster . Put it all back together tighten the center screw first and lock down the nut and you should be good again .
78 atc 90/180cc Dickson Full Suspension
76 ATC90/180cc Nicholson
77 atc 90 Dickson Full Suspension
84 KLT 110/123cc Powroll Racer from 80s
87 atc 125m stock
84 atc 200x Curtis Sparks
84 atc 200x Powroll My race bike from 80's
83 atc70/108cc Powroll blue Xmas Special
81 atc185s HP-ATC full suspension
Performance Shop is Open PM me for Service
My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10
Reply With Quote