Absolutely 3WD although any pitting, gouging, or any other damage in the metal obviously will show but the axle should turn out like Dirtweed's did. This is the last load I had done.
Power User
Teaching quads a lesson
Absolutely 3WD although any pitting, gouging, or any other damage in the metal obviously will show but the axle should turn out like Dirtweed's did. This is the last load I had done.
Power User
Teaching quads a lesson
I have seen so any builds where everything was painted, new plastic, new everything BUT old rusty fasteners and axles. I know not everyone has a metal finisher near them thanks to the EPA but If you do have one, go talk to them. Some of them don't like to do small loads so go talk to them. I have a guy here that will do 75lbs for 75 bucks. Axles are about 80 bucks. I have another load I hope to take to him soon.
Got The Holeshot
Arm chair racerJust too addicted
holyOriginally Posted by Flyingw
how do you know where all the bolts go when you put it all back together lol
73 atc 7084 ytm 200ern79 atc 70ytm 225 dratc 90
80 atc 110klt 250A84 atc 200es
85 atc 250es
gone but not forgotten restored 82 atc 70
Power User
Got the holeshot
Wow when I first looked at your pics I though it was my pics,but then I seen my red and black tool box sitting next to each other and I Knew they are in two different buildings. LOL
You are getting a lot better price then I am.Mine cost me $150 no matter how many pounds I send, I think I did 90 some pounds the first time. I'm still happy with that because chroming was $2 a bolt. And it's so much nicer putting motors back together with new looking bolts, let alone whole bikes.
Just Too Addicted
Arm chair racerJust too addicted
holy
The difficulty comes down to if you were good at puzzles when you were a kid.
"See, morbid and creepifying, I got no problem with, long as she does it quiet-like. "
Trikes:
1982 Honda ATC250R(in process), 1984 Honda ATC110, 1984 Honda 200s, 1985 Kawasaki KLT160(not running...yet)
Quads:
1990 Suzuki LT250S, 2013 Suzuki LT-Z400, 2014 Honda TRX450R SE
Power User
Got the holeshot
Wow that looks great.Cant wait to see the trike when its done.
250r rules
Power User
Teaching quads a lesson
The pic I posted is my spare bolts. I stripped a bunch of trikes a few years back and had all the hardware replated. I have them all sorted by diameter and length so when I need something I don't have to dig for what I need. It really is a pleasure to do a build with like new bolts.
At The Back Of The Pack
Arm chair racerFirst time rider
Anybody haf a rear rack plated?
85 Honda 250sx- STILL IN PIECES!!!
84 Honda 185s - traded off
85 Yamaha 225dr - parts machine for now
83 Yamaha tri-zinger 60cc - my sons first 3wheeler. $300 for zinger, $4000 for a broken leg, memories for a life time - PRICELESS
85 Honda Big Red 250es - traded off
86 Honda 250r - traded off
85 Kawasaki Tecate - new toy
84 Honda 200m - super clean puttin around toy
Just Too Addicted
Arm chair racerJust too addicted
They would have to blast it to get the paint off so it would probably come out with a matte finish.
"See, morbid and creepifying, I got no problem with, long as she does it quiet-like. "
Trikes:
1982 Honda ATC250R(in process), 1984 Honda ATC110, 1984 Honda 200s, 1985 Kawasaki KLT160(not running...yet)
Quads:
1990 Suzuki LT250S, 2013 Suzuki LT-Z400, 2014 Honda TRX450R SE
At The Back Of The Pack
Arm chair racerAt the back of the pack
I had my fooler's extended axle and axle hardware zinc plated black a couple weeks back at Bass plating in Bloomfield CT.
Axle came out looking brand new!
Power User
Got the holeshot
I'm going to try your guy out sometime next week. I have been doing complete stock refurbish jobs on my Kawasaki V-Twins so I need a bunch more bolts done.
Just Too Addicted
Arm chair racerJust too addicted
Nice Refurb. Is that just cleaned up or powdered?
"See, morbid and creepifying, I got no problem with, long as she does it quiet-like. "
Trikes:
1982 Honda ATC250R(in process), 1984 Honda ATC110, 1984 Honda 200s, 1985 Kawasaki KLT160(not running...yet)
Quads:
1990 Suzuki LT250S, 2013 Suzuki LT-Z400, 2014 Honda TRX450R SE
Power User
Got the holeshot
I sand blast them before I take it apart and then just use the VHT cast silver that has a little flake in it then clear coat. I 'll powder coat them and even polish them if the want but that's over a $1000 to do that.
Just Too Addicted
Arm chair racerJust too addicted
Well this time I took the KLT160 tank to get blasted and then to Overnight Plating to have the guys Nickel coat it
so it wouldn't rust anymore. They did a great job as usual. Now to have it powder coated and tattooed with Real Tree Camo.
"See, morbid and creepifying, I got no problem with, long as she does it quiet-like. "
Trikes:
1982 Honda ATC250R(in process), 1984 Honda ATC110, 1984 Honda 200s, 1985 Kawasaki KLT160(not running...yet)
Quads:
1990 Suzuki LT250S, 2013 Suzuki LT-Z400, 2014 Honda TRX450R SE
Roostin' Away
Roostin Away
Where in Rochester is this place? I'm out in Penfield every so often for doctors appointments. Never seen it out there.
Reply With Quote
