//ArrowChat Code
Results 1 to 7 of 7

Thread: how can I widen the rear track width on an 84 200es?

  1. #1
    Join Date
    Jun 2014
    Location
    KS
    --
    33

    how can I widen the rear track width on an 84 200es?

    I need to widen the rear track width of my 84 Honda 200ES. does anyone offer extended hubs or offset wheels? thanks for your help!

  2. #2
    Join Date
    Oct 2013
    Location
    Wherever I May Roam
    --
    3,757
    Should have a 4x130 pattern iirc, there are tons of wheel options.

  3. #3
    TrickShot's Avatar
    TrickShot is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Aug 2010
    Location
    Delaware County New York
    --
    358
    Do a search for "83 200e widened" Member Audio_Phill did this to his. The 84 200es hub splines are the same as the 200e if I remember correctly.
    Last edited by TrickShot; 10-13-2014 at 04:03 PM.

  4. #4
    kiser's Avatar
    kiser is offline Just Too Addicted Arm chair racerJust too addicted
    Join Date
    Dec 2008
    Location
    Coshocton Ohio
    --
    525
    Use 250x/300ex/400ex hubs. They have 4x110 bolt pattern. They gain about 3'' of width. 4x110 wheels have more offset also so you gain a little on the rims. I did this to my wife's 200 big red and it was a nice upgrade.

  5. #5
    Join Date
    Jun 2014
    Location
    KS
    --
    33
    Quote Originally Posted by kiser View Post
    Use 250x/300ex/400ex hubs. They have 4x110 bolt pattern. They gain about 3'' of width. 4x110 wheels have more offset also so you gain a little on the rims. I did this to my wife's 200 big red and it was a nice upgrade.
    kiser, that's exactly the information I was looking for, THANK YOU!!!

  6. #6
    kiser's Avatar
    kiser is offline Just Too Addicted Arm chair racerJust too addicted
    Join Date
    Dec 2008
    Location
    Coshocton Ohio
    --
    525
    No problem. Glad I could help. It's a direct bolt on operation and opens up tire/rim options a lot.

  7. #7
    Join Date
    Jul 2014
    Location
    Lloydminster, Alberta
    --
    503
    Any ideas on how to widen a 85 250r, can other hubs work on it as well?
    Mixing gas and haulin' ass


    1984 ATC 70 x2
    1985 ATC 250R-Ported/Polished, PWK 39mm, V-force 3's, Outerwears air box lid, FMF fatty with DG silencer, DWT wheels, LSR +4 axle, all black plastics
    1985 ATC 250R-stock

//ArrowChat Integreation Code //