As a few of my friends know a few months ago I asked a friend of mine who works at an aerospace machine shop I asked him to see if he can remake me short course kit mounts. Well so far it has been going very well as the lower mounts a jig was made and this is what they look like so far almost Honda perfect. The radiator mounts were also laser cut and welded on I saw them raw but they look real good so far. The downside is I had to donate a few of my stock radiator mounts to compare with the genuine Hondaline short course mount and they are a few differences to stock vs. short course. Upper teardrop mounts laser cut, but stock mounts were cut extended and turned the proper way they needed to be turned and twisted to look and function like short course mounts. I am very happy as my friend works and build his parts very close to Honda part and is very immaculate with no cutting any corners with anything. I hope to have this done by mid next week so I can do fitment on my ATC 250R but this is a pic of lower mounts that have been finished.