-
intake boot swap
I have a 1982 Honda ATC 250r.
Will the 85-86 Honda ATC 250r intake boot fit on my 82?
reason I ask is cause I got the bigger carb and need a bigger boot now... too hard to stretch the boot on mine
-
Yes the liquid r intake with bolt right on.You wont beable to use your airbox because of the angle of the liquid r boot.
250r rules
-
Options Chris,
I have done "overcoats" on intakes so the inside can be opened up as much as needed.
The material I use is the same I make Tecate intake boots from and has the ability to stretch a lot.
50 dollars shipped back to you in Canada. PM me if I can be of assistance.
john
I just shipped off a 2nd. one for Dual2stroke
http://www.3wheelerworld.com/showthr...e-boot-project
-
Im going to do the bigger carb mod this weekend..
I have a boot and reeds from a 1984 250r.. should I swap the reeds as well from the 84 to my 82? or use the reg reeds that came with the smaller carb?
-
Just wondering what you ended up using for a carb, intake boot, reeds, and how it all worked out.
//ArrowChat Integreation Code
//