//ArrowChat Code
Results 1 to 8 of 8

Thread: Chinese carbs on ebay for atc70

  1. 11-27-2014, 02:37 PM #1
    350Xccelerator's Avatar
    350Xccelerator
    350Xccelerator is offline Power User Teaching quads a lesson
    Join Date
    Apr 2003
    Location
    Bay Area CA.
    --
    2,638

    Chinese carbs on ebay for atc70

    Anyone purchase one before? What was your experience with it? I was looking at them for a while and noticed that some are not built the same. As in if you mount it, the petcock and hoses would run to the opposite side. These usually ran $20-$30

    I ended up finding one identical to oem for about $50
    Last edited by 350Xccelerator; 11-27-2014 at 07:36 PM.
    1985 350x
    1985 atc70
    2006 ltz400
    2017 z125pro
    Reply With Quote Reply With Quote
  2. 11-27-2014, 04:01 PM #2
    HarrisoN*
    HarrisoN* is offline At The Back Of The Pack Arm chair racerFirst time rider
    Join Date
    Feb 2010
    Location
    Bay Area, CA.
    --
    156
    theyre on a par with oem in terms of running and tuning just made with low grade pot metal.

    for $20 theyre great and if it lasts a few years then get another.

    the jets and screws do round out after a while because of the low quality metals used but I think oem jets fit

    also see your from the bay.
    Reply With Quote Reply With Quote
  3. 11-27-2014, 04:12 PM #3
    86125m
    86125m is offline Got The Holeshot Arm chair racerJust too addicted
    Join Date
    Jan 2014
    Location
    La
    --
    1,062
    these wincycles carbs are really good Ive put them on two of my bikes and I have no complaints they are bolt on adjust the idle and go. They take the stock jets and the jets are made in japan. http://www.ebay.com/itm/Honda-ATC-70...ea5d11&vxp=mtr. they are a little more expensive than the other aftermarket carbs but id say they are worth it.
    Reply With Quote Reply With Quote
  4. 11-27-2014, 10:16 PM #4
    82300R
    82300R is offline Got The Holeshot Arm chair racerJust too addicted
    Join Date
    Dec 2005
    Location
    cobbwebs in your mind
    --
    1,058
    I GOT a couple for my 80 110's. Had to like use the stock caps an not quite a direct bolt on...But worked out o.k. Better than nothing...
    I got a roll a quarters an making change !
    Reply With Quote Reply With Quote
  5. 11-28-2014, 06:14 AM #5
    clmeue37's Avatar
    clmeue37
    clmeue37 is offline At The Back Of The Pack Arm chair racerFirst time rider
    Join Date
    Jul 2012
    Location
    Millington, Michigan USA
    --
    205
    I run one of those carbs on one of the 110's and the 200s. No problems yet after almost 3 years.
    1980 Honda atc110, 1981 Honda atc110, 1983 Honda atc200e Big Red, 1984 Honda atc200es Big Red, 1984 Honda trx200, 1985 Honda atc200s

    Trikefest '15 '16

    Before destruction a man's heart is haughty, but humility comes before honor.
    -Proverbs 18:12
    Reply With Quote Reply With Quote
  6. 11-29-2014, 01:41 AM #6
    legacy51's Avatar
    legacy51
    legacy51 is offline First Time Rider Arm chair racerNew to the board
    Join Date
    Oct 2011
    Location
    SLC, UT
    --
    88
    I have only heard good things about the chinese carbs for these small engines but I do have a stock atc70 carb if you are interested.
    Reply With Quote Reply With Quote
  7. 12-03-2014, 04:13 PM #7
    Ol Deuce's Avatar
    Ol Deuce
    Ol Deuce is offline Got The Holeshot Arm chair racerJust too addicted
    Join Date
    Aug 2007
    Location
    Montana
    --
    857
    I buy from ZOOM and have not had any trouble with the carbs! most I use are from Japan !!!! good stuff (7 so far)
    DO the Best With What you got !



    My Feed back :cool
    Reply With Quote Reply With Quote
//ArrowChat Integreation Code //