The linky no worky
Got The Holeshot
Arm chair racerJust too addicted
The linky no worky
1985 250r-LED Performance 4mm Stroker motor
1978 ATC70 w/ Piranha 140cc
1972 - K1 - CT70 w/lifan 125cc
2017 YZ 250x- Braap
Youtube channel = http://www.youtube.com/user/ter5678/videos
Power User
Roostin Away
Could not get link to open.
I found it.
Thanks!
http://japan.webike.net/products/20262562.html
* 1978 ATC 90/180 Pauter PJ1 / Springer "Team BAPP" Bike *
* 1980 ATC 110/180 "Danny's Machine Works" 3D Sprint Dune Bike *
* Nicholson 500 Race Bike *
* HPATC Yamaha RD350 "Big Moe" Trike *
Power User
Got the holeshot
As I recall you can get them in Red White or Chrome.
I have a 70 project in the queue I was thinking of putting a chrome one on it.
http://http://japan.webike.net/products/20262563.html
New to the board
Arm chair racerNew to the board
The mounts are as simple as they come but they work great. I had some pipe in my scrap that was the perfect diameter. I think the original mounts were about 3/8" or so round. I used a tubing cutter to cut two pieces about 3/8" long and attached them with tapered head metal screws. Here's a crude paint drawing to show you what I'm saying.
I don't have any pictures on the frame but you basically end up with the same kind of knobs as the factory mounts.
At The Back Of The Pack
Arm chair racerAt the back of the pack
Correct link. http://japan.webike.net/
First Time Rider
Arm chair racerNew to the board
Sorry about the jacked link guys. The finish ain't the best, but to have a brand new tank and eat up the gap. It's totally worth it to me
First Time Rider
Arm chair racerNew to the board
Thanks tsox, I'm gonna weld mine and plug the old holes
First Time Rider
Arm chair racerNew to the board
They come in black, white, chrome I believe
First Time Rider
Arm chair racerNew to the board
Anyone have experience with the locin 125cc manual electric start? How about locin in general? Good engines?
First Time Rider
Arm chair racerNew to the board
okay i got a bunch of parts coming my way! pulled the trigger and talked to justin at wholesalecycle and he hooked me up with a loncin 125cc manual clutch electric start engine, swapped out the carb and manifold setup to a mikuni 22mm and manifold free of charge. uni filter and outerwear. got a bunch of cool parts coming from hondaatc.com. gonna run lights front and rear and a trx 400 light/kill/start setup. if i need help wiring this little guy, hopefully my fellow members can lend a hand lol. pictures too come. hopefully i can get those rims from Xowner.
New to the board
Arm chair racerNew to the board
Black, White, Red & chrome I think. They have some other cool tanks that I considered for mine.Originally Posted by lyon76
I have one of these "Bubble" tanks and a mount I made if anyone would be interested. It doesn't look so good with the frame stretch but looks awesome with a stock frame.
First Time Rider
Arm chair racerNew to the board
new tank mounts welded in. Parts are coming in. While new seat and engine come in tomorrow
First Time Rider
Arm chair racerNew to the board
doing some mock up. New seat looks great. 125cc manual electric. Should be able to take this to powder coating soon. Xowner sent me a tracking number for the 7" rims
New to the board
Arm chair racerNew to the board
You're doing a great job!
Work harder, faster, and take more pictures.
Really nice.
First Time Rider
Arm chair racerNew to the board
Wish I could get it done faster, but 12+ hours a day as a locomotive engineer is not helping the cause.
Reply With Quote
