"Pay it Forward" ------------>Lets get this part "y" started<-----------------

[Mr. Clean]

I have a OEM TRI Z Gas tank with brackets, cap and hardware. Have had it for a couple years and have zero use for it, tried to sell it and could not, I cant bring myself to throw it away.

Pay shipping and of course PAY IT FORWARD and its yours.

Of course if the MODS want to move or change this thread have at it!!

[yaegerb]

I have an entire first gen 200x bottom end with crank...no piston, no top-end. I can take pictures upon request. Just acquired this and have no use for it.

If you pay shipping and PAY IT FORWARD within this thread, its yours.

[83ATC185]

I have 3 185/200 carb bodies and associated parts that need a home and a 185 clarke tank without a petcock, as well as an 84 200s seat with a quarter size hole in the cover. Also a hondaline trailer hitch for 185/200's. Pics upon request.

[madmass]

I've got an early model 90 straight rear axle with the wide splines and sproket hub still on it. An early model 90 carb oem. Needs a kit but great for parts. Plastic aftermarket gas tank, was suppose to be for a 90 but seems to fit tight on the frame with a single fuel outlet on the right side.

[RIDE-RED 250r]

Im in!

I have a set of OEM 350x tank scoops sitting on a shelf in the garage. Color is and finish is very fair and one or both do have a minor stress crack (barely noticeable). I would not call these "restoration quality", but nice "OEM rider" scoops.

-Shipping to lower 48 on recipient's word to reimburse shipping once I get them on their way and get the price.
-Alaska, Hawaii, and Canada: We would have to take it a step at a time.

Pics below and of course, pay it forward.

One last thing: I might need to hang on to the little brackets. I am not sure if the new Maiers I have for the wife's 350x will need them or not yet. I will check.

[jakeesspoo]

i have a 1984 honda 110 seat that i no longer need. Bottom sides are rusted out buti got a new cover on it. Its not pretty but could get someone by a few years. Theres wrinkles in the vinyl. Never used spray adhesive before and used it to put on cover and damn did it grab so theres no getting out the wrinkles and i learned a lesson. It would at least look better than a completely duct taped seat. Its up for grabs if uou pay the sctual shipping. Honor system. I would tell you the actual shipping cost

[oscarmayer]

I have a set of rims for a 82-84BigRed (may even fit the 85087) with the tractor style tires. I will honestly never use them. When I redo my Red, I will be installing new allow rims instead of the stocker steeliest. I will also install new tires. These are slightly dry rotted but still useable. If you want them they are yours. just pay for shipping. I think around $40-$50 is what it costs for the set.

[RubberSalt]

I've got some parts to rebuilt the tecate stator if anyone needs their's rebuilt. Pay for shipping and I'll rebuild the ignition side of the stators for no cost (as long as you test them!)

Message me for my contact info.

[ironchop]

bumpity bump

[muthey]

I have a set of rear fenders for a ytm 200 and a headlight bezel for a ytm 200. fenders are crack free just need to be polished, the headlight bezel is in beautiful condition, have other parts as well. Headlight bezel is gone.

[f76]

200x miscellaneous items. Rear brake hub and disc, decent shape. Thumb throttle, moves freely. Axle jam nuts. Tail light bracket and back plastic half. Chain sliders, used but plenty of life left. And a random sprocket or brake hub, 39 spline. Pay shipping and you can have whatever you want.

[f76]

[R-N-D]

I have a rim that is in great condition, freshly powder coated as well. Unfortunately, I do not know what it fits. I thought it would fit my 84' 200es but it didn't. Of course, I found this out after having it powder coated. It is obviously a 4 bolt with looks to be a 4" spread between the holes. Pictures tell the story but it measures 10" in diameter and stands 10" in width. Honestly, all I know but take a look. Yours for the simple cost of "Paying it forward" as the thread states. Within the states, I'll pay the shipping since it's only around $10-15 I assume. Anywhere else, shoot me a zip or postal code and I can get a quote. Thanks.

[90guy]

Let's see I've got a box of some 1st gen 200x stuff. K&N air filter in good useable shape. Part of a gasket set all that was removed was to do a clutch . 3 Barnett dirt digger clutch plates. They haven't been used just soaking in oil. Since they sent me 3 instead of 5. Just pay the ride and everything's yours. I'll get some pics.

[Jmoozy27]

Bunch of 200s stuff. Axle, shifter, air box, fender supports, motor mounts, etc. You pay shipping.