was pressure washing some parts and wasnt paying attention and accidently went over the rad fins. will this still be good enough for cooling? i tried to bending most of them back apart.
First Time Rider
Arm chair racerNew to the board
was pressure washing some parts and wasnt paying attention and accidently went over the rad fins. will this still be good enough for cooling? i tried to bending most of them back apart.
Power User
The day begins with 3WW
Your fins are fine. Take a small flat head screw drive and just straight them back out. I have removed sections of fins totally and still was fine.
Wires, Hoses, & Digital Wizardry.
Got the holeshot
Yeah, I agree with oldskool. It looks worse than it is. Some tedious, time consuming, work straightening them out with a screwdriver & small needle-nose pliers, and you'll be just fine.
Red Rider's Sand Machine Updated 07/23/14
At The Back Of The Pack
Arm chair racerAt the back of the pack
You can also go to an autoparts store and buy one of those radiator fin combs...... saves many painful hours of bending each one back individually. they are plastic and cost a few bucks.
1985 Honda ATC 250ES BIG RED
1985 Honda ATC 350X
1985 Honda FL670R Odyssey ROTAX conversion
1993 Honda Type II 200
2003 Honda TRX 90
2006 Honda TRX 90
Power User
The day begins with 3WW
or you can upgrade them for less than $100 shipped from ebay to larger alloy shinny ones!
________________
I'm just a squirrel "Trying" to get a nut!
Nearly every kind of Honda ATC (plus some custom ones
several Yami Quads (mostly custom built for MX racing)
https://www.mikesatvfix.com
"Freedom is not free...but the U.S. Marine Corps will pay most of your share."
Reply With Quote