Roostin' Away
Arm chair racerRoostin Away
I cannot get the freaking things wired right! trying to get them ready for christmas and im running out of time. the points are clean and every thing but i cannot get the wireing figured out!!! HHHHHHHHHHHHEEEEEEEEEELLLLLLLLLLLLLPPPPPPPPPP MMMMMMMMMMMMEEEEEEEEEEEEEEEEEEEEEEE!
Saying "it's the trikes fault" is like saying "guns kill people"
don't poke the bear... you'll get banned
Got The Holeshot
Arm chair racerJust too addicted
Originally Posted by AK47KID
Download a manual yet from this site??- . If you got pictures they help alot too. Is it all hooked up but not starting???? - Or are you not sure where some wires go?? Do you got the points adjusted correctly??? -sometimes theyre just bad....
Lots of smart guys here to help you but you gotta be more clear to get more reponses...
Previously Owned:
1985 ATC 250R (261cc)- 38MM PWK QV/AS, VFORCE3, RPM TIMING ADV., FULL DG EXH, CLARKE WHITE TANK, DOUGLAS RED LABELS, PRM NERF BARS, + ALUM. PARTS
1983 ATC 185S (186cc)- HI COMP., BASSANI HEADER, REAR DISC BRAKE CONV., '86 200X HUBS, ALUM. RIMS, DIRT DEVILS
1982 ATC 185S (224cc)- PK WELD-ON KIT, PK CLAMPS, PK EXHAUST, SL90 SHOCKS, OIL COOLER, PCCC RIMS
1981 ATC 185S
1984 ATC 250R
1981 ATC 250R
1983 ATC 110
1969 HONDA MINI TRAIL 50
TRIKELESS
Roostin' Away
Arm chair racerRoostin Away
the points are fine in them. This isnt the first time they were rewired so theres handy man joe wiring that is the wrong color of wire. just mainly need to figure out how to wire the ignition coil. i replaced a bad kill switch last night but still the same results
Saying "it's the trikes fault" is like saying "guns kill people"
don't poke the bear... you'll get banned
Roostin' Away
Arm chair racerRoostin Away
do you need pictures? ive used the 3ww manuals and diagrams but they arnt detaled
Saying "it's the trikes fault" is like saying "guns kill people"
don't poke the bear... you'll get banned
Got The Holeshot
Arm chair racerJust too addicted
Not detailed??-Hmmm....Did you see this one by chance?-
http://www.3wheelerworld.com/oldsite...0x73Thru82.jpg
Post some pics if you can if that dont help- it might make this easier to figure out what exactly is wrong...
Previously Owned:
1985 ATC 250R (261cc)- 38MM PWK QV/AS, VFORCE3, RPM TIMING ADV., FULL DG EXH, CLARKE WHITE TANK, DOUGLAS RED LABELS, PRM NERF BARS, + ALUM. PARTS
1983 ATC 185S (186cc)- HI COMP., BASSANI HEADER, REAR DISC BRAKE CONV., '86 200X HUBS, ALUM. RIMS, DIRT DEVILS
1982 ATC 185S (224cc)- PK WELD-ON KIT, PK CLAMPS, PK EXHAUST, SL90 SHOCKS, OIL COOLER, PCCC RIMS
1981 ATC 185S
1984 ATC 250R
1981 ATC 250R
1983 ATC 110
1969 HONDA MINI TRAIL 50
TRIKELESS
Roostin' Away
Arm chair racerRoostin Away
mine dont have head lights but yes ive used the one like that just not with the headlight. i just need to know how to wire the ignition. like does it get ground from the frame when mounted to the bike? or does it need to have a round wire going to it? my ohm meter isnt working right so cant really check to see if its bad...
Saying "it's the trikes fault" is like saying "guns kill people"
don't poke the bear... you'll get banned
Got The Holeshot
Arm chair racerJust too addicted
Yes -ground it to the the frame. I assume it doesnt have a ring terminal on the wire in question? Ground is usually where the coil mounts to the frame.
Previously Owned:
1985 ATC 250R (261cc)- 38MM PWK QV/AS, VFORCE3, RPM TIMING ADV., FULL DG EXH, CLARKE WHITE TANK, DOUGLAS RED LABELS, PRM NERF BARS, + ALUM. PARTS
1983 ATC 185S (186cc)- HI COMP., BASSANI HEADER, REAR DISC BRAKE CONV., '86 200X HUBS, ALUM. RIMS, DIRT DEVILS
1982 ATC 185S (224cc)- PK WELD-ON KIT, PK CLAMPS, PK EXHAUST, SL90 SHOCKS, OIL COOLER, PCCC RIMS
1981 ATC 185S
1984 ATC 250R
1981 ATC 250R
1983 ATC 110
1969 HONDA MINI TRAIL 50
TRIKELESS
Roostin' Away
Arm chair racerRoostin Away
it did but i took it off because of the last owners wiring. okay. so then the positive slips in the the slip connector
Saying "it's the trikes fault" is like saying "guns kill people"
don't poke the bear... you'll get banned
Roostin' Away
Arm chair racerRoostin Away
al right i got theone running i just need to put the other one back toether and im going to have the local cycle center do the carb tuning. thanks for your help
Saying "it's the trikes fault" is like saying "guns kill people"
don't poke the bear... you'll get banned
Got The Holeshot
Arm chair racerJust too addicted
Thats great!-no problem dude....
Previously Owned:
1985 ATC 250R (261cc)- 38MM PWK QV/AS, VFORCE3, RPM TIMING ADV., FULL DG EXH, CLARKE WHITE TANK, DOUGLAS RED LABELS, PRM NERF BARS, + ALUM. PARTS
1983 ATC 185S (186cc)- HI COMP., BASSANI HEADER, REAR DISC BRAKE CONV., '86 200X HUBS, ALUM. RIMS, DIRT DEVILS
1982 ATC 185S (224cc)- PK WELD-ON KIT, PK CLAMPS, PK EXHAUST, SL90 SHOCKS, OIL COOLER, PCCC RIMS
1981 ATC 185S
1984 ATC 250R
1981 ATC 250R
1983 ATC 110
1969 HONDA MINI TRAIL 50
TRIKELESS
Roostin' Away
Arm chair racerRoostin Away
Got them both them both running. Thanks. I feel dumb not knowing the ignition coil needs positive AND negative(ground) to work. Tia me you very much can't thank you enough. Maybe sometime I the future when my brothers get older and those 70s can't haul them around I'll do a top end swap or something to give it more 'umph' it had a hard time hauling my 200lb butt around.
Saying "it's the trikes fault" is like saying "guns kill people"
don't poke the bear... you'll get banned
First Time Rider
Arm chair racerNew to the board
A Piranha 90cc would be a cheap yet very noticable power upgrade for your trikes while still keeping the auto clutch. To power is smooth so anyone can ride it yet enough to power wheelie in 1st and 2nd gears with a 250 lb person on it. Plus you get a modern 12v CDI ignition system snd loose the old points and condenser to deal with.
1985 ATC 350X all original/OEM Honda parts
1972 US90 Dickson Designs 2" stretched tube chassis, 200x Forks, Piranha 150cc, VM26
1985 ATC70 Piranha 114cc BBK, Ported Race Head, TB300 Cam, Spangler's Exhaust
1985 ATC70 Piranha 150cc, VM26, Z40 cam, Ported head, Two Brothers Exhaust, 2" stretch
1970 Honda CT70125cc Mikuni 24, XR80 Forks, Aluminum Swingarm, Carbon Exhaust
1972 Honda CT70110cc e-start, Mikuni 20 carb, Carbon Exhaust, Aluminum Wheels
1993 Honda Z50R all original
Power User
The day begins with 3WW
download the manuals from my site. link in my sig.
________________
I'm just a squirrel "Trying" to get a nut!
Nearly every kind of Honda ATC (plus some custom ones
several Yami Quads (mostly custom built for MX racing)
https://www.mikesatvfix.com
"Freedom is not free...but the U.S. Marine Corps will pay most of your share."
Reply With Quote
