I have owned many 200x in my time and almost every one the frame broke at the front motor mount .Was wondering if anybody else has had this problem or am I just thrashing it to hard and if there is something to prevent this ? Thanks for your time.
First Time Rider
Arm chair racerNew to the board
I have owned many 200x in my time and almost every one the frame broke at the front motor mount .Was wondering if anybody else has had this problem or am I just thrashing it to hard and if there is something to prevent this ? Thanks for your time.
Power User
The day begins with 3WW
Very common issue , weld a gusset their .
78 atc 90/180cc Dickson Full Suspension
76 ATC90/180cc Nicholson
77 atc 90 Dickson Full Suspension
84 KLT 110/123cc Powroll Racer from 80s
87 atc 125m stock
84 atc 200x Curtis Sparks
84 atc 200x Powroll My race bike from 80's
83 atc70/108cc Powroll blue Xmas Special
81 atc185s HP-ATC full suspension
Performance Shop is Open PM me for Service
My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10
Power User
The day begins with 3WW
The stock 200x frames are junk...plus add 30 years on a bad design and you will get failure.
This is what you do to them front mounts and all the other locations that should be fixed up to ensure it does not break, bend or twist. If you need one fixed up strip the bike down and I will take it over to HRE who does all my 3wheeler frame work. I go there a lot and have my own project shelf there.
www.HREatv.com
First Time Rider
Arm chair racerNew to the board
Thanks I will talk to you at the banks on Sunday
Reply With Quote