//ArrowChat Code
Page 4 of 5 FirstFirst ... 2 3 4 5 LastLast
Results 46 to 60 of 67

Thread: ATC 110 build

  1. #46
    1979atc's Avatar
    1979atc is offline At The Back Of The Pack Arm chair racerFirst time rider
    Join Date
    Jun 2015
    Location
    NW Ohio
    --
    213
    The piston I have is a 15mm wrist pin, did some comparing with pistons my dad has and we figure that it may be a 118 piston. Thanks
    1979 Atc 110 helm and son
    1977 Atc 90
    1980 Atc 110
    1984 Atc 110
    1985 Atc 110
    1988 XR 200 bored 40 over,
    Atc 200x bottom end.

  2. #47
    1979atc's Avatar
    1979atc is offline At The Back Of The Pack Arm chair racerFirst time rider
    Join Date
    Jun 2015
    Location
    NW Ohio
    --
    213
    Here is what the build looks like so far, I had a BAPP 55 tooth rear sprocket and a BAPP chain tensioner I put on today. I just have the motor sitting in the frame until I can find a 123 piston for a good price, or just be able to find rings for a 118cc piston. That would save me from boring the cylinder also. My 3 bolt rims I will be getting sand blasted, and put flat tracks on the rear, instead of having these big knobby tires on the rear.
    Click image for larger version. 

Name:	IMG_20160306_1946599_rewind.jpg 
Views:	48 
Size:	1.24 MB 
ID:	228663Click image for larger version. 

Name:	IMG_20160306_1947111_rewind.jpg 
Views:	44 
Size:	1.37 MB 
ID:	228664Click image for larger version. 

Name:	IMG_20160306_1946389_rewind.jpg 
Views:	44 
Size:	1.29 MB 
ID:	228665
    1979 Atc 110 helm and son
    1977 Atc 90
    1980 Atc 110
    1984 Atc 110
    1985 Atc 110
    1988 XR 200 bored 40 over,
    Atc 200x bottom end.

  3. #48
    1979atc's Avatar
    1979atc is offline At The Back Of The Pack Arm chair racerFirst time rider
    Join Date
    Jun 2015
    Location
    NW Ohio
    --
    213
    Have a few more things to add, lightened flywheel, (not finished yet) and got a BAPP intake manifold, I am putting the BAPP intake on my H&S trike, will be putting a sudco on this current build.
    Click image for larger version. 

Name:	IMG_20160316_1738236_rewind.jpg 
Views:	30 
Size:	1.54 MB 
ID:	229135Click image for larger version. 

Name:	Screenshot_2016-03-16-00-17-51_kindlephoto-19726350.jpg 
Views:	25 
Size:	39.5 KB 
ID:	229136
    Last edited by 1979atc; 03-16-2016 at 06:22 PM.
    1979 Atc 110 helm and son
    1977 Atc 90
    1980 Atc 110
    1984 Atc 110
    1985 Atc 110
    1988 XR 200 bored 40 over,
    Atc 200x bottom end.

  4. #49
    1979atc's Avatar
    1979atc is offline At The Back Of The Pack Arm chair racerFirst time rider
    Join Date
    Jun 2015
    Location
    NW Ohio
    --
    213
    Here are some pictures of my first build H&S trike, and I recently just put on a BAPP long intake on. My other build that is going to 123cc is currently still down, still waiting for some parts, got a web 99 cam, 123cc piston and 3in vintage wheel spacers coming for it. Thanks
    Click image for larger version. 

Name:	IMG_20160319_1343038_rewind.jpg 
Views:	36 
Size:	934.2 KB 
ID:	229580Click image for larger version. 

Name:	IMG_20160319_1342529_rewind.jpg 
Views:	34 
Size:	1.47 MB 
ID:	229581Click image for larger version. 

Name:	FB_IMG_1458409289421.jpg 
Views:	32 
Size:	751.3 KB 
ID:	229582Click image for larger version. 

Name:	IMG_20160319_1342393_rewind.jpg 
Views:	37 
Size:	1.47 MB 
ID:	229583
    Last edited by 1979atc; 03-26-2016 at 02:08 PM.
    1979 Atc 110 helm and son
    1977 Atc 90
    1980 Atc 110
    1984 Atc 110
    1985 Atc 110
    1988 XR 200 bored 40 over,
    Atc 200x bottom end.

  5. #50
    Join Date
    May 2006
    Location
    The Open Road
    --
    4,729
    You got some pretty sweet stuff on there. Nice rides too.

    Sent from my Z998 using Tapatalk

  6. #51
    1979atc's Avatar
    1979atc is offline At The Back Of The Pack Arm chair racerFirst time rider
    Join Date
    Jun 2015
    Location
    NW Ohio
    --
    213
    Another update. I have been in the process of making fork extenders. I just got a set finished and have installed them. I like the look and it handles a lot better. Click image for larger version. 

Name:	IMG_20160401_2103526_rewind.jpg 
Views:	41 
Size:	1.24 MB 
ID:	229873
    1979 Atc 110 helm and son
    1977 Atc 90
    1980 Atc 110
    1984 Atc 110
    1985 Atc 110
    1988 XR 200 bored 40 over,
    Atc 200x bottom end.

  7. #52
    1979atc's Avatar
    1979atc is offline At The Back Of The Pack Arm chair racerFirst time rider
    Join Date
    Jun 2015
    Location
    NW Ohio
    --
    213
    Click image for larger version. 

Name:	IMG_20160430_1230152_rewind.jpg 
Views:	23 
Size:	864.0 KB 
ID:	231048Click image for larger version. 

Name:	IMG_20160430_1230431_rewind.jpg 
Views:	27 
Size:	1.01 MB 
ID:	231049
    Here are some pictures of my piston, can anyone identify the brand of the piston. The cc is unknown at the moment. Pictures show all the symbols on the piston. Thanks
    1979 Atc 110 helm and son
    1977 Atc 90
    1980 Atc 110
    1984 Atc 110
    1985 Atc 110
    1988 XR 200 bored 40 over,
    Atc 200x bottom end.

  8. #53
    Join Date
    Jul 2009
    Location
    South Florida
    --
    6,722
    Looks like a PK piston that's been stroker cut to me
    78 atc 90/180cc Dickson Full Suspension
    76 ATC90/180cc Nicholson
    77 atc 90 Dickson Full Suspension
    84 KLT 110/123cc Powroll Racer from 80s
    87 atc 125m stock
    84 atc 200x Curtis Sparks
    84 atc 200x Powroll My race bike from 80's
    83 atc70/108cc Powroll blue Xmas Special
    81 atc185s HP-ATC full suspension

    Performance Shop is Open PM me for Service

    My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10

  9. #54
    1979atc's Avatar
    1979atc is offline At The Back Of The Pack Arm chair racerFirst time rider
    Join Date
    Jun 2015
    Location
    NW Ohio
    --
    213
    Thanks Mike! Sent measurements to Jwheeler hope I can find out what cc this piston is so I can get rings.
    1979 Atc 110 helm and son
    1977 Atc 90
    1980 Atc 110
    1984 Atc 110
    1985 Atc 110
    1988 XR 200 bored 40 over,
    Atc 200x bottom end.

  10. #55
    Join Date
    Jun 2013
    Location
    Oceanside, CA.
    --
    610
    Quote Originally Posted by shortline10 View Post
    Looks like a PK piston that's been stroker cut to me
    As Mike states the original designed piston had been modified to be used in a stroker crank motor. If used expect it to knock, make louder piston noise as the normal clearance is going to be larger due to shorter piston skirts. Easy enough to measure piston size, measure across bottom of piston skirt, add @ 0.004 for clearance and convert to millimeter.
    ’84 YT60
    ’85 350x (423cc) with ’81 XL500 head conversion
    ’83 XR500 (628cc) converted 3 Wheel hybrid
    ’73 CB750 K3 converted 3 Wheel hybrid
    ’86 TRX250R chassis XR650L engine hybrid
    ’89 TRX250R (stock )
    ’90 LT500 Quadzilla
    ’85 FL350 Odysses ( water cooled head )
    Lost (sold) but not forgotten ’80 ATC 110 (205cc on alcohol ) ’83 200x ( 222cc ) ’83 200x ( 185s eng ) ’85 350x ( stock )
    added to the collection recently, (2) '70 US90 Aquarius Blue and '74 ATC90 Daytona Orange

  11. #56
    1979atc's Avatar
    1979atc is offline At The Back Of The Pack Arm chair racerFirst time rider
    Join Date
    Jun 2015
    Location
    NW Ohio
    --
    213
    Here are some goodies! Anyone recognize what in the left hand bottom corner? Click image for larger version. 

Name:	image.jpg 
Views:	68 
Size:	1.82 MB 
ID:	231130
    1979 Atc 110 helm and son
    1977 Atc 90
    1980 Atc 110
    1984 Atc 110
    1985 Atc 110
    1988 XR 200 bored 40 over,
    Atc 200x bottom end.

  12. #57
    Join Date
    Jul 2009
    Location
    South Florida
    --
    6,722
    Yep it replaces the points set up , cool old school parts !
    78 atc 90/180cc Dickson Full Suspension
    76 ATC90/180cc Nicholson
    77 atc 90 Dickson Full Suspension
    84 KLT 110/123cc Powroll Racer from 80s
    87 atc 125m stock
    84 atc 200x Curtis Sparks
    84 atc 200x Powroll My race bike from 80's
    83 atc70/108cc Powroll blue Xmas Special
    81 atc185s HP-ATC full suspension

    Performance Shop is Open PM me for Service

    My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10

  13. #58
    1979atc's Avatar
    1979atc is offline At The Back Of The Pack Arm chair racerFirst time rider
    Join Date
    Jun 2015
    Location
    NW Ohio
    --
    213
    Quote Originally Posted by shortline10 View Post
    Yep it replaces the points set up , cool old school parts !
    I seen only one other one and you posted it Mike. Wish I could take all this stuff off my Fathers hands! More to come when we find his other stash!
    1979 Atc 110 helm and son
    1977 Atc 90
    1980 Atc 110
    1984 Atc 110
    1985 Atc 110
    1988 XR 200 bored 40 over,
    Atc 200x bottom end.

  14. #59
    Join Date
    Jul 2009
    Location
    South Florida
    --
    6,722
    Well if you want one for your self LMK lol I have no plans for the one I have


    Quote Originally Posted by 1979atc View Post
    I seen only one other one and you posted it Mike. Wish I could take all this stuff off my Fathers hands! More to come when we find his other stash!
    78 atc 90/180cc Dickson Full Suspension
    76 ATC90/180cc Nicholson
    77 atc 90 Dickson Full Suspension
    84 KLT 110/123cc Powroll Racer from 80s
    87 atc 125m stock
    84 atc 200x Curtis Sparks
    84 atc 200x Powroll My race bike from 80's
    83 atc70/108cc Powroll blue Xmas Special
    81 atc185s HP-ATC full suspension

    Performance Shop is Open PM me for Service

    My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10

  15. #60
    1979atc's Avatar
    1979atc is offline At The Back Of The Pack Arm chair racerFirst time rider
    Join Date
    Jun 2015
    Location
    NW Ohio
    --
    213
    Been wanting to share this with some of you for awhile, and today I could finally get a picture of it in the daylight. My father's old modified race bike, it all needs put back together. This is a fully suspended bike, This thing is very wide, wider than legal limit I was told. The motor that goes in this is a stroked 210cc 185s motor. Huge stage 2 cam, 32mm carb I believe went on it. Had a supertrapp full exhaust system and a lot of other goodies. He still has all the old parts that went on it. Packed in our several barns of parts, lol. We plan on restoring this bike someday, or get it all back togther and running again. Has been part for awhile now, ever since I can remember and I'm 17 now. Thanks!
    Click image for larger version. 

Name:	image.jpg 
Views:	51 
Size:	1.25 MB 
ID:	231181
    Attached Thumbnails Attached Thumbnails image.jpg  
    Last edited by 1979atc; 05-02-2016 at 10:46 PM.
    1979 Atc 110 helm and son
    1977 Atc 90
    1980 Atc 110
    1984 Atc 110
    1985 Atc 110
    1988 XR 200 bored 40 over,
    Atc 200x bottom end.

//ArrowChat Integreation Code //