Not ready on the forks yet...
Did install all the new bolts on so everything on the swinger is new bolts.
Sent from my iPhone using Tapatalk
Not ready on the forks yet...
Did install all the new bolts on so everything on the swinger is new bolts.
Sent from my iPhone using Tapatalk
________________
I'm just a squirrel "Trying" to get a nut!
Nearly every kind of Honda ATC (plus some custom ones
several Yami Quads (mostly custom built for MX racing)
https://www.mikesatvfix.com
"Freedom is not free...but the U.S. Marine Corps will pay most of your share."
________________
I'm just a squirrel "Trying" to get a nut!
Nearly every kind of Honda ATC (plus some custom ones
several Yami Quads (mostly custom built for MX racing)
https://www.mikesatvfix.com
"Freedom is not free...but the U.S. Marine Corps will pay most of your share."
Here are some updates photos and details.
Top end will be natural alloy color with clear costing on it.
The Wiseco piston is preped and ready for installation. This motor had very lot hours on it. I was surprised at the lack of wear on any of the internal parts or clutch. I went ahead and rebuilt it and put new clutch parts in just for good measure.
Sent from my iPhone using Tapatalk
________________
I'm just a squirrel "Trying" to get a nut!
Nearly every kind of Honda ATC (plus some custom ones
several Yami Quads (mostly custom built for MX racing)
https://www.mikesatvfix.com
"Freedom is not free...but the U.S. Marine Corps will pay most of your share."
Always wondered about the wiseco hi-comp pistons for the 350x, if they were worth opening a low hour engine up and putting one in for a power gain? Nice build by the way.
Matt
1980 ATC 70 Needs Restoration
1985 ATC 250es Fully Refurbed
1986 ATC 350x Mint Original
there is about a 2-3 HP increase over stock piston average and with proper supporting mods who knows. this build will be about 8-10hp over stock due to all the mods and supporting stuff for it. Everything from carb swap to cam and springs and piston. Also high quality exhaust and header being installed to finish it. so it will be sweet when done!
________________
I'm just a squirrel "Trying" to get a nut!
Nearly every kind of Honda ATC (plus some custom ones
several Yami Quads (mostly custom built for MX racing)
https://www.mikesatvfix.com
"Freedom is not free...but the U.S. Marine Corps will pay most of your share."
Yeah sounds like wouldn't be worth opening up my stock motor just for a piston. Like you said you would want to compliment the piston with all the other modifications and I'm not ready to ruin a survivor original for that. All the best with your project.
1980 ATC 70 Needs Restoration
1985 ATC 250es Fully Refurbed
1986 ATC 350x Mint Original
Is this thing running yet?
Take off the skirt!
Email- onformula1@hotmail.com Rebuilt, Revalved, custom springs, lowering, forks & shocks, Custom Suspension, all brands, 2-3-4 wheeler's- PM or Email with questions.
***Check out my album for cool pictures*** http://www.3wheelerworld.com/album.php?albumid=2527
As always- Everything I post is IMHO.
Email- onformula1@hotmail.com Rebuilt, Revalved, custom springs, lowering, forks & shocks, Custom Suspension, all brands, 2-3-4 wheeler's- PM or Email with questions.
***Check out my album for cool pictures*** http://www.3wheelerworld.com/album.php?albumid=2527
As always- Everything I post is IMHO.
How come the smilies look like fukken peeps now. Always the last candy left in the Easter basket...peeps
Sent from my Z958 using Tapatalk
^^haha no kidding right?
________________
I'm just a squirrel "Trying" to get a nut!
Nearly every kind of Honda ATC (plus some custom ones
several Yami Quads (mostly custom built for MX racing)
https://www.mikesatvfix.com
"Freedom is not free...but the U.S. Marine Corps will pay most of your share."
What carb and exhaust did you go with? Looking sharp! One other quick thought - wouldn't the clear coat 'yellow' fairly fast due to the heat these air cooled motors make? Just curious
i am running a mikuni round slide 38mm carb. and a Fatty SS-header. i have not decided on what stinger (muffler) to run. I was toying with the idea of a 450R one.
the engine heat clear will not yellow. that is what I used. it has ceramic in the paint that helps keep it form turning. Now there is not enough to trap hear. only to keep the paint from burning off.
________________
I'm just a squirrel "Trying" to get a nut!
Nearly every kind of Honda ATC (plus some custom ones
several Yami Quads (mostly custom built for MX racing)
https://www.mikesatvfix.com
"Freedom is not free...but the U.S. Marine Corps will pay most of your share."
Yeah true that Milner, I love to tinker, nothing better than it. Probably should leave my 350x alone and start on this 70..
1980 ATC 70 Needs Restoration
1985 ATC 250es Fully Refurbed
1986 ATC 350x Mint Original
Email- onformula1@hotmail.com Rebuilt, Revalved, custom springs, lowering, forks & shocks, Custom Suspension, all brands, 2-3-4 wheeler's- PM or Email with questions.
***Check out my album for cool pictures*** http://www.3wheelerworld.com/album.php?albumid=2527
As always- Everything I post is IMHO.
That's true but try finding a 350x motor over here!
1980 ATC 70 Needs Restoration
1985 ATC 250es Fully Refurbed
1986 ATC 350x Mint Original