I have an 86 trx70 project. New stator, ignition, cdi, cylinder, piston and head. Before the new cylinder and new head it would start but smoked like no tomorrow. I had replaced the rings on the old piston, still smoking like a the old misquote trucks. So new head. It is all stock set up. So now I get spark in the ignition wire, but not from the spark plug. Brand new plug. Switched it out with a plug I know works from my 250sx and still no spark from the plug. So what's the deal? This seems crazy
When I check continuity from one plug end to the other I get no reading on either plug. Normal? Any thoughts please.