https://www.atcheaven.com/product/ca...eesms-atc200x/ Does anyone have any experiences with these? I am thinking about buying one because I would like a little more lower-midrange power in my X.
https://www.atcheaven.com/product/ca...eesms-atc200x/ Does anyone have any experiences with these? I am thinking about buying one because I would like a little more lower-midrange power in my X.
Don't seem like to bad of a price. Maybe I should get one for my Xr 200.
1979 Atc 110 helm and son
1977 Atc 90
1980 Atc 110
1984 Atc 110
1985 Atc 110
1988 XR 200 bored 40 over,
Atc 200x bottom end.
Just be carful , I purchased one a while back and the pin hole for the advancer was about 10 degrees off
Had to send it back , the lift was the same as a stock 200x cam and had just a little more duration , not an upgrade IMO .
78 atc 90/180cc Dickson Full Suspension
76 ATC90/180cc Nicholson
77 atc 90 Dickson Full Suspension
84 KLT 110/123cc Powroll Racer from 80s
87 atc 125m stock
84 atc 200x Curtis Sparks
84 atc 200x Powroll My race bike from 80's
83 atc70/108cc Powroll blue Xmas Special
81 atc185s HP-ATC full suspension
Performance Shop is Open PM me for Service
My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10
Good to know, thanks shortline!
How would the XR200 cam compare to the one in the link? The price is comparable.
Liberalism suspends the intellect of its victims, while at the same time tricking them into believing that they're smarter than everyone else.
If we've done business together, please leave me feedback. Thank You!:
http://www.3wheelerworld.com/showthr...t=Scootertrash
I have a 1988 xr 200, the bottom end is a Atc 200x transmission and crank. The cylinder is bored 40 over and has the Atc 200x head and valve cover which would compare to the cam on the link. I was looking to increase the power I have a bigger carb and that's all at this moment. Now I will keep looking, due to this cam in the link is a bad cam.
1979 Atc 110 helm and son
1977 Atc 90
1980 Atc 110
1984 Atc 110
1985 Atc 110
1988 XR 200 bored 40 over,
Atc 200x bottom end.
Brand NEW Xr200 1986-2002 cams part# 14101-446-000 are still available. No need for a used one or one made by someone we have no clue who they are. Id rather have Honda OEM and can be had for less than $80 bucks
Why not go to web camshaft a and get s came made for your trike? Then you know exactly what you have as well as it will work way better than an XR. You will not feel much of a difference between the XR and stock cam. So why waste $?
Sent from my iPhone using Tapatalk
________________
I'm just a squirrel "Trying" to get a nut!
Nearly every kind of Honda ATC (plus some custom ones
several Yami Quads (mostly custom built for MX racing)
https://www.mikesatvfix.com
"Freedom is not free...but the U.S. Marine Corps will pay most of your share."
[QUOTEWhy not go to web camshaft a and get s came made for your trike? ][/QUOTE]
Do you know if they ship to Australia, Only a phone# and a snail mail address on their website, do they only sell through distrib's, ?
n
Webcamshafts are not cheap.
You will have to use different springs and Ti retainers, have the rockers hard welded and for it to work the best it can, a 10.25:1 higher compression piston and a better flowing exhaust.
All our government does is distract us while they steal from us, misspend our tax $ and ruin our country
79 XL185 cam. Cheap and more lift and duration.
85 ATC110 - The Greatest ATC of all time - (My First - new in 85)
83 FL250 - Odyssey w/420cc - SOLD
82 185s -10.25:1 piston, Full 200x upper, Goki Electric start - SOLD
84 200x - Auto-X - Weisco Hi-comp, Cam'd, Bassani'd, Westcoast swinger, -SOLD
82 200E Big Red -SOLD
85 ATC250ES Big Red - Snow Plow !