Holy crap, I'm crying. Please tell me someone here can play play a guitar and sing that
Holy crap, I'm crying. Please tell me someone here can play play a guitar and sing that
Looking for a Bassani silencer for a 2nd gen tecate, the style with the movable mount. 1st gen will work
'86 ATC 250R, Build Thread http://www.3wheelerworld.com/showthr...highlight=250r
'86 "Factory Tri racing" Tri-Z http://www.3wheelerworld.com/showthr...b-Top-Tank-ect
Pile of Tecate Parts
My Feedback Thread: http://www.3wheelerworld.com/showthr...edback-for-bkm
He was awesome in Rainbow as well
I can. Have not heard that song in a while but I'm confident I could play through the whole thing, full tube amp in all its glory.
Apparently that was just oil I was seeing on the cylinder wall. They checked the clearances and everything was in spec, bore looked "perfect besides some small scratches from debris at startup". I have not been back to pick it up yet.
A few questions. It's "next to impossible" to run this without a silencer and "real air filter". What is a "real" air filter?
Second, runs alright, but doesn't want to rev out. Timing too retarded maybe?
timing is not adjustable.
first question makes no sense so............... yes.
I have an adjustable timing plate.
Picture of a 1982 adjustable timing plate on your motor please. I have never seen one.
Thats....a...stator...
Sent from my SM-G935V using Tapatalk
Saying "it's the trikes fault" is like saying "guns kill people"
don't poke the bear... you'll get banned
Retarding it a degree did nothing, maybe made it worse. Completely dies if I give it full throttle. Rich, right? Dropping the needle or downing mains has fixed this, but I'm afraid of frying another piston.
That's a stock stator plate. There are slots in it because someone got cute and decided they wanted to be able to retard or advance it. What marks are you referring to, I notice no timing marks on the plate. Best you can hope for is put it in the center of the slots and pray it's at zero degrees TDC. Either that or go to eBay and get a stator plate that isn't modified.
Top left bolt. There's a notch there and one on the case. Almost looks factory.