//ArrowChat Code
Results 1 to 9 of 9

Thread: 200x supertrapp?

  1. 05-23-2016, 10:00 PM #1
    hippyplz's Avatar
    hippyplz
    hippyplz is offline Just Too Addicted Arm chair racerJust too addicted
    Join Date
    Jul 2010
    Location
    Pekin IL
    --
    529

    200x supertrapp?

    Anyone have pics of the how the head pipe runs on a supertrapp on first gen 200x? I started mounting in on my 200s but couldn't get it to fit with the bolt on suspension, so I swapped it with the dg on the x thinking that would work but running into the same problem.
    1985 250r
    1985 200s
    1984 200x
    bandito x2
    1979 atc70
    Trikefest 2012,13,14,15
    Reply With Quote Reply With Quote
  2. 05-23-2016, 10:58 PM #2
    Mackus84's Avatar
    Mackus84
    Mackus84 is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Feb 2016
    Location
    Lakeland, Fl
    --
    427
    I have a Dg setup on my 200X i could snap a pic of. Would that help? The pipe should run the same right?
    Reply With Quote Reply With Quote
  3. 05-24-2016, 07:35 AM #3
    hippyplz's Avatar
    hippyplz
    hippyplz is offline Just Too Addicted Arm chair racerJust too addicted
    Join Date
    Jul 2010
    Location
    Pekin IL
    --
    529
    I appreciate the offer but I have a dg here. Click image for larger version.  Name: 20160524_052404.jpg  Views: 22  Size: 1.49 MB  ID: 232064
    1985 250r
    1985 200s
    1984 200x
    bandito x2
    1979 atc70
    Trikefest 2012,13,14,15
    Reply With Quote Reply With Quote
  4. 05-24-2016, 07:37 AM #4
    hippyplz's Avatar
    hippyplz
    hippyplz is offline Just Too Addicted Arm chair racerJust too addicted
    Join Date
    Jul 2010
    Location
    Pekin IL
    --
    529
    Click image for larger version.  Name: 20160524_052248.jpg  Views: 19  Size: 2.32 MB  ID: 232065 it is supposed to run back to the outside of the frame right?
    1985 250r
    1985 200s
    1984 200x
    bandito x2
    1979 atc70
    Trikefest 2012,13,14,15
    Reply With Quote Reply With Quote
  5. 05-24-2016, 04:55 PM #5
    shortline10's Avatar
    shortline10
    shortline10 is offline Power User The day begins with 3WW
    Join Date
    Jul 2009
    Location
    South Florida
    --
    6,726
    Yep , very similar to the stock set up . TC made a shorty supertrapp that came out at an angle and didn't mout to the grab bar .
    78 atc 90/180cc Dickson Full Suspension
    76 ATC90/180cc Nicholson
    77 atc 90 Dickson Full Suspension
    84 KLT 110/123cc Powroll Racer from 80s
    87 atc 125m stock
    84 atc 200x Curtis Sparks
    84 atc 200x Powroll My race bike from 80's
    83 atc70/108cc Powroll blue Xmas Special
    81 atc185s HP-ATC full suspension

    Performance Shop is Open PM me for Service

    My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10
    Reply With Quote Reply With Quote
  6. 05-25-2016, 06:54 AM #6
    3R Better's Avatar
    3R Better
    3R Better is offline New to the board Arm chair racerNew to the board
    Join Date
    Oct 2015
    Location
    South Jersey
    --
    22
    It goes around downtube and inside the frame by air box
    Roll up your dustflaps !
    Reply With Quote Reply With Quote
  7. 05-25-2016, 07:40 PM #7
    Mickey Dunlap's Avatar
    Mickey Dunlap
    Mickey Dunlap is offline Power User Got the holeshot
    Join Date
    Jan 2009
    Location
    Hyndman PA
    --
    1,905
    I'm making some new big head pipes to make the DG pipes better. They will be made of stainless and start out a little bigger, but much shorter at the first "U" bend before stepping up in size as it goes back to the meg which will have to be modded for the bigger pipe. It's close to a old Powroll pipe / SupperTrapp race pipe, but hopefully better.
    Reply With Quote Reply With Quote
  8. 05-25-2016, 11:51 PM #8
    christph's Avatar
    christph
    christph is offline Got The Holeshot Arm chair racerJust too addicted
    Join Date
    Mar 2010
    Location
    Arizona
    --
    844
    Quote Originally Posted by Mickey Dunlap View Post
    I'm making some new big head pipes to make the DG pipes better. They will be made of stainless and start out a little bigger, but much shorter at the first "U" bend before stepping up in size as it goes back to the meg which will have to be modded for the bigger pipe. It's close to a old Powroll pipe / SupperTrapp race pipe, but hopefully better.
    So, for those of us with DG pipes, in the future we can send them to you to be modified?
    Reply With Quote Reply With Quote
  9. 05-26-2016, 08:28 AM #9
    Mickey Dunlap's Avatar
    Mickey Dunlap
    Mickey Dunlap is offline Power User Got the holeshot
    Join Date
    Jan 2009
    Location
    Hyndman PA
    --
    1,905
    Quote Originally Posted by christph View Post
    So, for those of us with DG pipes, in the future we can send them to you to be modified?
    No I'll just send you the head pipes and the part the you will weld to the meg.

    So it will be a kit.
    Reply With Quote Reply With Quote
//ArrowChat Integreation Code //