Fill the handlebars with BBs, or steel shot. DISCLAIMER; I am NOT an expert, nor do I play one on 3WW.
Fill the handlebars with BBs, or steel shot. DISCLAIMER; I am NOT an expert, nor do I play one on 3WW.
Last edited by tripledog; 05-27-2016 at 10:52 PM.
If a 200x is vibrating so bad you can't stand it, there is something else going on. It's trying to tell you there is an issue, listen to it.
'86 ATC 250R, Build Thread http://www.3wheelerworld.com/showthr...highlight=250r
'86 "Factory Tri racing" Tri-Z http://www.3wheelerworld.com/showthr...b-Top-Tank-ect
Pile of Tecate Parts
My Feedback Thread: http://www.3wheelerworld.com/showthr...edback-for-bkm
So, could it be crank bearings? Or what all could it be? I just had my 250sx lock up on me, so I really don't want to go through this again.
1986 Honda 200x
1985 Honda 250sx
FOR SALE
Take a video and show the vibration.
It'll be Tuesday or later before I'll be able to get it. Won't be home till Monday anyway.
1986 Honda 200x
1985 Honda 250sx
FOR SALE
No news on the video. All I have is my phone, and it isn't sufficient. I'll figure it out soon enough.
1986 Honda 200x
1985 Honda 250sx
FOR SALE
ok so to be clear, your engine is vibrating badly at idle? that was never answered.
check the engine mounts to ensure they are all tight.
________________
I'm just a squirrel "Trying" to get a nut!
Nearly every kind of Honda ATC (plus some custom ones
several Yami Quads (mostly custom built for MX racing)
https://www.mikesatvfix.com
"Freedom is not free...but the U.S. Marine Corps will pay most of your share."
No, at idle, it isn't vibrating. Just during acceleration.
You can do it... not as bad as it seems. I was quite a bit intimidated when i first pulled mine apart. Followed the manual to a T and it was a piece of cake.
EDIT: This is in reference to taking the bottom end apart
Do this. Put the trike in neutral and rev it half way. Slowly. Does the vibration happen with it like that or only when riding?
Sent from my iPhone using Tapatalk
________________
I'm just a squirrel "Trying" to get a nut!
Nearly every kind of Honda ATC (plus some custom ones
several Yami Quads (mostly custom built for MX racing)
https://www.mikesatvfix.com
"Freedom is not free...but the U.S. Marine Corps will pay most of your share."
ok then you have something internal to the engine then. it should not do that. i would venture to say a bearing someplace is letting go.
________________
I'm just a squirrel "Trying" to get a nut!
Nearly every kind of Honda ATC (plus some custom ones
several Yami Quads (mostly custom built for MX racing)
https://www.mikesatvfix.com
"Freedom is not free...but the U.S. Marine Corps will pay most of your share."