//ArrowChat Code
Results 1 to 5 of 5

Thread: Bayou 220 carb dimensions

  1. #1
    Join Date
    Mar 2011
    Location
    Red Lion pa
    --
    1,542

    Bayou 220 carb dimensions

    Does anyone have KLF bayou 220 that they could get the outside dimensions of the intake and airbox ports of the carb? I'm searching for an alternative carb that still has replacement parts and rebuild kits available for my KLT160 and KLT185. Wanted to see if this carb could be a direct mount or not. The KLT is VM22ss with intake O.D. of 1.308 and airbox side of of 1.615.
    Thanks in advance!
    insanity - Doing the same thing over and over and expecting a different result

    My Feedback Thread.....http://www.3wheelerworld.com/showthr...ck-for-MRSOUND


    86 honda big red
    85 250sx
    82 250r
    86 klt 185 black (project)
    86 klt 185 red
    85 klt 160 (Floyd)
    85 klt 110 X2 (projects)
    86 klt 110 X2
    84 klt 200
    84 atc 70
    DUCKSTER!

  2. #2
    Join Date
    Apr 2013
    Location
    snyder texas
    --
    456
    will try to pull carb next day or so and mic one for you believe this one is 95 model
    you know whats right therefore you know what is expected

  3. #3
    Join Date
    Mar 2011
    Location
    Red Lion pa
    --
    1,542
    Thanks man! That would be greatly appreciated!


    Sent from my iPhone using Tapatalk
    insanity - Doing the same thing over and over and expecting a different result

    My Feedback Thread.....http://www.3wheelerworld.com/showthr...ck-for-MRSOUND


    86 honda big red
    85 250sx
    82 250r
    86 klt 185 black (project)
    86 klt 185 red
    85 klt 160 (Floyd)
    85 klt 110 X2 (projects)
    86 klt 110 X2
    84 klt 200
    84 atc 70
    DUCKSTER!

  4. #4
    Join Date
    Apr 2013
    Location
    snyder texas
    --
    456
    this is a mikuni intake OD 1.412(36mm), airbox side OD 1.605(41mm), OAL 3.285, height (bottom of bowl to top of slide chamber without cap) 5" have not opened it up but can if you need any jet sizes, not sure of carb model there is some numbers stamped up by intake side but cant be for sure what they are hope this helps danny
    you know whats right therefore you know what is expected

  5. #5
    Join Date
    Mar 2011
    Location
    Red Lion pa
    --
    1,542
    Thank you for taking the time to do this and adding the extra dimensions. If I go this route looks like I might need to see if the intake/boot will mount up as well from the 220. Again thank you!!
    Mike
    insanity - Doing the same thing over and over and expecting a different result

    My Feedback Thread.....http://www.3wheelerworld.com/showthr...ck-for-MRSOUND


    86 honda big red
    85 250sx
    82 250r
    86 klt 185 black (project)
    86 klt 185 red
    85 klt 160 (Floyd)
    85 klt 110 X2 (projects)
    86 klt 110 X2
    84 klt 200
    84 atc 70
    DUCKSTER!

//ArrowChat Integreation Code //