First Time Rider
Arm chair racerNew to the board
Any recommendations for some 250SX handlebars? I noticed mine are slightly bent. I can probably take them off and tweak them back and give them a shot of paint while I'm at it but I am entertaining the thought of replacing them with a new set with a crossbar. Anyone know what is currently out there that fits and closely matches the geometry of the OEM bars?
Just Too Addicted
Arm chair racerJust too addicted
I bought Moose racing bars for both of my Sx's. No issues what so ever.
My rides (click to view)
6/84 250sx(Original owner)
7/84 250sx
Click here to view my finished SX project thread
Click here to view my feedback thread
First Time Rider
Arm chair racerNew to the board
Do you remember which ones and what size?
Just Too Addicted
Arm chair racerJust too addicted
If I remember right.....Originally Posted by Herboso
Moose Racing - p#0601-1803 - 7/8in. Carbon Steel Handlebar, ATV-HI
My rides (click to view)
6/84 250sx(Original owner)
7/84 250sx
Click here to view my finished SX project thread
Click here to view my feedback thread
First Time Rider
Arm chair racerNew to the board
Thanks. I'll check those out.
First Time Rider
Arm chair racerNew to the board
Those bars look great.
First Time Rider
Arm chair racerNew to the board
New bars arrived today. They look and work great. The only complaint I have is the knurling does not match the risers. The risers are spaced farther out on the bars than the knurling so that the risers only have about a 1/4 inch of knurling to grab onto. Should not be a problem but just a little less than ideal. Otherwise, great looking bars. I especially like the red look.
Just Too Addicted
Arm chair racerJust too addicted
New bars arrived today. They look and work great. The only complaint I have is the knurling does not match the risers. The risers are spaced farther out on the bars than the knurling so that the risers only have about a 1/4 inch of knurling to grab onto. Should not be a problem but just a little less than ideal. Otherwise, great looking bars. I especially like the red look.
Yeah, its been a while since I installed mine, and I honestly dont remember about the knurling not going completely across the top of the risors.
That said, I can tell you that it hasnt been an issue.
My rides (click to view)
6/84 250sx(Original owner)
7/84 250sx
Click here to view my finished SX project thread
Click here to view my feedback thread
First Time Rider
Arm chair racerNew to the board
No problem. I'm happy with them. Hard to complain too much about after market bars not being a perfect fit on a 30 year old, discontinued bike.
Got The Holeshot
Arm chair racerJust too addicted
Yep same thing with the aftermarket bars on my 200x But it has not been an issue and I have run the bike pretty hard.
Reply With Quote