Im looking for a rear suspension for a 185s . i will buy a whole chassis or a nos kit . i know alot of these were made back in the day . there were a few different companys that made them . thanks guys .im in search of more than one .
First Time Rider
Arm chair racerNew to the board
Im looking for a rear suspension for a 185s . i will buy a whole chassis or a nos kit . i know alot of these were made back in the day . there were a few different companys that made them . thanks guys .im in search of more than one .
First Time Rider
Arm chair racerNew to the board
No replies! Still searching if any can help . thanks
Power User
Lord of the trike
There was one on eBay for years. I wanna say it was down to around $300 plus shipping. I have a build thread on one which I have lost motivation on. I will try to find it and post the link.
R.I.P. John Swinehart
TRIKEFEST 11, 12, 13, 14, 15, 16, 17, 19
Epic Mikfest 17
86 200x
85 250sx
85 big red
85 atc 70
Fabiodriven- cereal goes in first, then milk.
I’ve got an 8” Grip on a 10” turd... Kyle Kiser
First Time Rider
Arm chair racerNew to the board
I started one with a lt230 quad racer swing arm. The honda bearing carrier will bolt right in with a couple of washers for spacers make a coue of mounting tabs and shock mount and your good
First Time Rider
Arm chair racerNew to the board
Thanks but im looking for a old school weld in or bolt on one
First Time Rider
Arm chair racerNew to the board
Or a rolling chassis .and i have had no luck looking on ebay
First Time Rider
Arm chair racerNew to the board
Good luck they are getting few and far between you could try veilmonkey dont know if hes still on here or not
First Time Rider
Arm chair racerNew to the board
If william rotax franks can restore the rarest trikes ever built to better than showroom condition i can find the kit im after . there were about 4000 of them built i heard from a credible source . not sure if that was one company or all of them about 10 or better companys made these.
First Time Rider
Arm chair racerNew to the board
I did try him as well but did not get a response . still waiting to hear from another member here on the forum
Power User
Roostin Away
West Coast Craigs List will be your best shot at locating one.
* 1978 ATC 90/180 Pauter PJ1 / Springer "Team BAPP" Bike *
* 1980 ATC 110/180 "Danny's Machine Works" 3D Sprint Dune Bike *
* Nicholson 500 Race Bike *
* HPATC Yamaha RD350 "Big Moe" Trike *
First Time Rider
Arm chair racerNew to the board
A good place to look for sure . but i think it will fall upon me from my fellow members here... I hope anyway
Power User
Roostin Away
Jeremy (90Crazy) had a complete fully suspended Chrome Nicholson frame.....He wasnt giving it away but if you want the best fully suspended aftermarket frame built then that is the one you want. As far as I know it is still for sale.
http://www.3wheelerworld.com/showthr...ight=nicholson
* 1978 ATC 90/180 Pauter PJ1 / Springer "Team BAPP" Bike *
* 1980 ATC 110/180 "Danny's Machine Works" 3D Sprint Dune Bike *
* Nicholson 500 Race Bike *
* HPATC Yamaha RD350 "Big Moe" Trike *
First Time Rider
Arm chair racerNew to the board
Thank you for the lead. I pm him
First Time Rider
Arm chair racerNew to the board
Still no responses from any one still waiting and looking .
Reply With Quote