Looking very nice espically since what you started with!!
Looking very nice espically since what you started with!!
73 atc 7084 ytm 200ern79 atc 70ytm 225 dratc 90
80 atc 110klt 250A84 atc 200es
85 atc 250es
gone but not forgotten restored 82 atc 70
_______________________________
1986 Honda TR200 Fat Cat
http://www.3wheelerworld.com/showthr...-Fat-Cat-TR200
1985 Honda 250SX
http://www.3wheelerworld.com/showthr...1985-ATC-250SX
1982 Honda 250R
http://www.3wheelerworld.com/showthr...982-Honda-250R
Finally got my muffler sorted. Welded a 1-1/2" adapter to the stock header. Welded a muffler hanger to the muffler and mated them up using 1-1/2" flex pipe. This thing sounds badass.
Gave it a test run around my pool thinking I was going to lose torque as this MRP muffler is for a 150cc. So far from that, this thing has wicked torque and power.
Last edited by MPDano; 11-27-2016 at 07:38 PM.
_______________________________
1986 Honda TR200 Fat Cat
http://www.3wheelerworld.com/showthr...-Fat-Cat-TR200
1985 Honda 250SX
http://www.3wheelerworld.com/showthr...1985-ATC-250SX
1982 Honda 250R
http://www.3wheelerworld.com/showthr...982-Honda-250R
A little exhaust vid
https://youtu.be/ZjDmuQRqgIE
_______________________________
1986 Honda TR200 Fat Cat
http://www.3wheelerworld.com/showthr...-Fat-Cat-TR200
1985 Honda 250SX
http://www.3wheelerworld.com/showthr...1985-ATC-250SX
1982 Honda 250R
http://www.3wheelerworld.com/showthr...982-Honda-250R
Just purchased a bunch of stuff to finish this project out, including the plastics. Wanna take it out during the my Christmas holiday 2 week vacation. Time to start ramping this up.
_______________________________
1986 Honda TR200 Fat Cat
http://www.3wheelerworld.com/showthr...-Fat-Cat-TR200
1985 Honda 250SX
http://www.3wheelerworld.com/showthr...1985-ATC-250SX
1982 Honda 250R
http://www.3wheelerworld.com/showthr...982-Honda-250R
My rides (click to view)
6/84 250sx(Original owner)
7/84 250sx
Click here to view my finished SX project thread
Click here to view my feedback thread
Got a few parts in today. Ignition panel and front brake perch. Also started on the seat foam repair.
_______________________________
1986 Honda TR200 Fat Cat
http://www.3wheelerworld.com/showthr...-Fat-Cat-TR200
1985 Honda 250SX
http://www.3wheelerworld.com/showthr...1985-ATC-250SX
1982 Honda 250R
http://www.3wheelerworld.com/showthr...982-Honda-250R
Where'd ya get the front brake perch from? I'm looking for one as well...
1985 Honda ATC 250ES
1985 Honda ATC 250SX
1984 Honda ATC 200M
1983 Honda ATC 200
1984 Honda ATC 110
_______________________________
1986 Honda TR200 Fat Cat
http://www.3wheelerworld.com/showthr...-Fat-Cat-TR200
1985 Honda 250SX
http://www.3wheelerworld.com/showthr...1985-ATC-250SX
1982 Honda 250R
http://www.3wheelerworld.com/showthr...982-Honda-250R
Not too much activity, and got 95% of all the parts and plastics but trying to find the time.
I did install the 200X rear light. Have to get this all done by Saturday and I plan to take it to the desert on Sunday.
_______________________________
1986 Honda TR200 Fat Cat
http://www.3wheelerworld.com/showthr...-Fat-Cat-TR200
1985 Honda 250SX
http://www.3wheelerworld.com/showthr...1985-ATC-250SX
1982 Honda 250R
http://www.3wheelerworld.com/showthr...982-Honda-250R
_______________________________
1986 Honda TR200 Fat Cat
http://www.3wheelerworld.com/showthr...-Fat-Cat-TR200
1985 Honda 250SX
http://www.3wheelerworld.com/showthr...1985-ATC-250SX
1982 Honda 250R
http://www.3wheelerworld.com/showthr...982-Honda-250R
_______________________________
1986 Honda TR200 Fat Cat
http://www.3wheelerworld.com/showthr...-Fat-Cat-TR200
1985 Honda 250SX
http://www.3wheelerworld.com/showthr...1985-ATC-250SX
1982 Honda 250R
http://www.3wheelerworld.com/showthr...982-Honda-250R
Bought the last pieces that I know of. The front and rear mud flaps with fasteners.
In the last parts to get done.
1) modify and install washers for front wheel
2) install front brake cable and support pieces
3) install Renthal crossbar/pad
4) heat and bend seat plastic, seat hardware and seat cover
5) install seat to rear fender
6) install rubber hole covers to fender supports
7) make ignition switch mount to instrument cover
8) install mud flaps and install front fender
9) white touch ups
_______________________________
1986 Honda TR200 Fat Cat
http://www.3wheelerworld.com/showthr...-Fat-Cat-TR200
1985 Honda 250SX
http://www.3wheelerworld.com/showthr...1985-ATC-250SX
1982 Honda 250R
http://www.3wheelerworld.com/showthr...982-Honda-250R
_______________________________
1986 Honda TR200 Fat Cat
http://www.3wheelerworld.com/showthr...-Fat-Cat-TR200
1985 Honda 250SX
http://www.3wheelerworld.com/showthr...1985-ATC-250SX
1982 Honda 250R
http://www.3wheelerworld.com/showthr...982-Honda-250R