//ArrowChat Code
Page 2 of 9 FirstFirst 1 2 3 4 ... LastLast
Results 16 to 30 of 121

Thread: "Liquid X"

  1. #16
    Join Date
    Jan 2015
    Location
    LaGrange, OH
    --
    253
    What are you using for a carb setup?

  2. #17
    Join Date
    Sep 2014
    Location
    Oregon
    --
    591
    Quote Originally Posted by 350xtrike.rider View Post
    What are you using for a carb setup?
    I have my stock 27mm 200x carb, but am thinking about going to 30mm, I belive that is what's recommended.

  3. #18
    Join Date
    Sep 2014
    Location
    Oregon
    --
    591
    Quote Originally Posted by Rob Canadian View Post
    Great build on this. I love it!!!!
    Thank you. It's starting to come together. Sure would like some input from Dochbikes. It was his idea after all.

  4. #19
    Join Date
    Sep 2014
    Location
    Oregon
    --
    591
    Click image for larger version. 

Name:	20161029_152045.jpg 
Views:	121 
Size:	1.35 MB 
ID:	236440I had to grind off a tab on the motor as it was hitting the cross member under the motor. Also had to grind the front lower motor mount on the motor because it was hitting the frame. I don't have a pic of that right now, but I get one later.

  5. #20
    Join Date
    Mar 2007
    Location
    Texas
    --
    5,046
    Chinese 250cc watercooled engine. about .5hp-1hp over the stock 200x. no mods available for it, but you can take the had off have it decked down a couple of thousandths to increase compression and that will bump you to 15-16hp stock instead of the 13.5hp. I have the 300cc version sitting on a shelf and been debating on doing something with it. good luck.
    it will be a 1-off but the question is will it be worth it? only you can answer that. The CRF230F may have been a better choice due to it is a near bolt on and tons of support and also includes electric start. but you already got the motor so use it. worst is you run it for a few years then either sell the trike or swap the motor out.
    have fun and enjoy! you may need to modify the mower engine mounts as they will probably not align up and hit the case.
    ________________
    I'm just a squirrel "Trying" to get a nut!

    Nearly every kind of Honda ATC (plus some custom ones
    several Yami Quads (mostly custom built for MX racing)

    https://www.mikesatvfix.com

    "Freedom is not free...but the U.S. Marine Corps will pay most of your share."

  6. #21
    Join Date
    Mar 2007
    Location
    Texas
    --
    5,046
    should be a 250cc. that is where the china started making water cooled. they go up to 500cc. I have the 300cc from TaoTao and an considering doing something with it.
    ________________
    I'm just a squirrel "Trying" to get a nut!

    Nearly every kind of Honda ATC (plus some custom ones
    several Yami Quads (mostly custom built for MX racing)

    https://www.mikesatvfix.com

    "Freedom is not free...but the U.S. Marine Corps will pay most of your share."

  7. #22
    Join Date
    Sep 2014
    Location
    Oregon
    --
    591
    It was listed on ebay as 200cc. I thought it resembles the 250 as well. The engine is a 169ML, and not a whole lot of info about it on the net. Also comes up as a CG 200. Bummer is no kick start option.

  8. #23
    Join Date
    May 2015
    Location
    Watford city, North Dakota United States "THE BAKKEN" / Lebanon, Oregon United states.
    --
    1,081
    I'll have to make a trip up to you X and see that build

    Sent from my SM-G935V using Tapatalk
    Saying "it's the trikes fault" is like saying "guns kill people"
    don't poke the bear... you'll get banned

  9. #24
    Join Date
    Sep 2014
    Location
    Oregon
    --
    591
    Gotta get to the dunes!!!

  10. #25
    Join Date
    Sep 2014
    Location
    Oregon
    --
    591
    Motor mounts complete. Took some pics of the ones I had to modify. I got my exhaust mounted. I had to add a little spacer because of my bent grab bar. I went ahead and ordered a 30mm carb off ebay, and I also ordered the kx 100 radiator and give it a shot. Getting closer, I still need to order a wiring harness, and I was not sure if any of the stuff off the stocker will work, or should I just order the whole kit.Click image for larger version. 

Name:	20161106_110851.jpg 
Views:	77 
Size:	1.52 MB 
ID:	236629Click image for larger version. 

Name:	20161106_103952.jpg 
Views:	71 
Size:	1.64 MB 
ID:	236630Click image for larger version. 

Name:	20161106_103716.jpg 
Views:	67 
Size:	1.48 MB 
ID:	236631Click image for larger version. 

Name:	20161106_103502.jpg 
Views:	70 
Size:	1.42 MB 
ID:	236632Click image for larger version. 

Name:	20161106_103453.jpg 
Views:	70 
Size:	1.50 MB 
ID:	236633Click image for larger version. 

Name:	20161106_103440.jpg 
Views:	71 
Size:	1.58 MB 
ID:	236634Click image for larger version. 

Name:	20161106_102802.jpg 
Views:	87 
Size:	2.23 MB 
ID:	236635Click image for larger version. 

Name:	20161106_102802.jpg 
Views:	87 
Size:	2.23 MB 
ID:	236635Click image for larger version. 

Name:	20161106_095242.jpg 
Views:	68 
Size:	1.50 MB 
ID:	236636

  11. #26
    Join Date
    Sep 2014
    Location
    Oregon
    --
    591
    Another question. I don't have a clue what this is for. Some sort of epa crap? Here's another pic I found on the net. Can't seem to find the part to cap it off. Should I just make one?Click image for larger version. 

Name:	20161104_150817.jpg 
Views:	106 
Size:	1.40 MB 
ID:	236637Click image for larger version. 

Name:	Screenshot_2016-10-28-21-01-00.jpg 
Views:	111 
Size:	95.0 KB 
ID:	236638

  12. #27
    Join Date
    May 2016
    Location
    OH Canada
    --
    1,102
    Only guessing but looks like some sort of an EGR. Exhaust Gas Reciculation or maybe for an O2 sensor(?)

  13. #28
    Join Date
    Jan 2009
    Location
    ohio
    --
    1,749
    Cap it off
    If its on the internet its got to be true they can't put any lie's on the internet

  14. #29
    Join Date
    Mar 2007
    Location
    Texas
    --
    5,046
    EGR relief that is not needed. Make a cover and cap it, or take head off and tap hole then put a plug in it(perfected method). If you do the plug you can even thread it in to the point you can make it flush in the exhaust port so it does. It interfere with exhaust flow having a hole in the middle.


    Sent from my iPhone using Tapatalk
    ________________
    I'm just a squirrel "Trying" to get a nut!

    Nearly every kind of Honda ATC (plus some custom ones
    several Yami Quads (mostly custom built for MX racing)

    https://www.mikesatvfix.com

    "Freedom is not free...but the U.S. Marine Corps will pay most of your share."

  15. #30
    Join Date
    Mar 2007
    Location
    Texas
    --
    5,046

    "Liquid X"

    Quote Originally Posted by x-rider View Post
    It was listed on ebay as 200cc. I thought it resembles the 250 as well. The engine is a 169ML, and not a whole lot of info about it on the net. Also comes up as a CG 200. Bummer is no kick start option.
    Dang! Well guess I was wrong. I had only seen the 250s as a water cooled option. You luck out! I am thinking of dropping the 300 into a spare X frame.
    But mine has both kick and electric.

    Sent from my iPhone using Tapatalk
    ________________
    I'm just a squirrel "Trying" to get a nut!

    Nearly every kind of Honda ATC (plus some custom ones
    several Yami Quads (mostly custom built for MX racing)

    https://www.mikesatvfix.com

    "Freedom is not free...but the U.S. Marine Corps will pay most of your share."

//ArrowChat Integreation Code //