For those of you looking to fit a DG sunburst head to the 2nd generation 250R, I thought I would alert you to a fitment problem. I bought a sunburst head a few months back thinking they were compatible with the 1st and 2nd generation R. Wrong. The DG head for the 1st and 2nd generation are different. If you buy a 1st generation head for a 2nd generation R you will run into a pipe interference problem. The frame is narrower on the 2nd generation R and the pipe (including the aftermarket DG) hits the back of the head making it impossible to mount. Thankfully there's a small machine shop near me with a milling machine and he did a great job cutting back a couple of fins (see pictures). DG did something similar from the factory back in the day but I didn't know it until I ran into the problem myself.