Glad to see that I'm not the only one that thinks steel toed boots are for pusscees
Glad to see that I'm not the only one that thinks steel toed boots are for pusscees
Lol, ya they work great for the medium weight "accidents"
The heavy drops( weight was about 1100lb, )I don't want to deal with cutting a boot off!
Ouch pretty much sums it up.
Trikes
1970/71 US 90 (Aquarius Blue)
1970/71 US 90 (Future Project)
1972/73 US 90 Camo Project (110 Big Bore)
1972/73 US 90 Green
1977 ATC 90 w/83 110 motor (Fugly)
1982 ATC 70
1983 ATC 70 (Ladybug)
1973 ATC 70
1965 Marketeer 3 Wheel Golf Cart with 1986 Honda 250 drivetrain
TF 2015
Other
1983 Honda Z50
1978 Honda XL75
Feedback http://www.3wheelerworld.com/showthr...ck-for-coopool
http://www.3wheelerworld.com/showthr...k-for-coolpool
Ok well I picked up some 6' fork extensions from the local scrapyard. 162lbsx0.40$
They need some work. Started cutting out the damage and will weld in patches. I am on the lookout for a fork boom pole too
Last edited by plastikosmd; 04-16-2017 at 09:36 AM.
Make one...lol we made one for our machine here at work. we took a 10 foot long piece of 4" schedule 40 black pipe welded two hooks on one end and another set at the half way mark then we welded two sections of square 1/4" steel on to the pipe... one at the opposite end from the hooks and another that would be just shorter than out forks. it worked out great. we used it to unload 20 foot long wooden cases of stainless Steel tubing from semi trailers.
I probably will in time. Right now projects are not in short supply!
Patches cut and fit, nice patina match!
Welded
Ground smooth
Nice increase in length
Last edited by plastikosmd; 04-16-2017 at 09:36 AM.