Power User
Roostin Away
I’d definetly have steve or a machine shop do the outer case boring for the 87 shaft. Steve, I didn’t need to bore the outer case for the 87 “seal” itself to fit the 86 outer case. This is the seal that fits for the conversion (only boring the shaft hole)
U need the 87 20mm thrust washer where the red arrow is.
Hope this helps
Shep
Last edited by Shep1970; 09-03-2019 at 08:13 AM.
Just Too Addicted
Arm chair racerJust too addicted
Well its been a long time since my last update but I finally had a swingarm built last year. Today I dropped it and the engine mounts, taillight brackets and caliper mounts off to get chrome plated. Now I'm looking to have the frame powder coated blue to go with the rest of the theme. I just have to make a few small repairs and it'll be ready.... although my pocketbook isn't.
Sent from my SM-G988U using Tapatalk
1979 ATC110
1983 ATC110
1984 ATC110
1984 ATC125M
1985 ATC110 2 of them
1985 ATC110 The wife's
1987 ATC125M
1985 ATC250ES
1984 DX225 with 250 timberwolf engine and swingarm. Wolf in DX clothing
Just Too Addicted
Arm chair racerJust too addicted
Got my front tire in today. It'll be a good fit on my 10 inch aluminum wheel I picked up a couple years ago. I'm gonna buy another set of hoosiers to go on the rear and I have set of 86 350x wheels I'll put trail tires on. I need to gather up all my parts and lay them out to get a better idea of if there's anything left I need to buy for this project.
Sent from my SM-G988U using Tapatalk
1979 ATC110
1983 ATC110
1984 ATC110
1984 ATC125M
1985 ATC110 2 of them
1985 ATC110 The wife's
1987 ATC125M
1985 ATC250ES
1984 DX225 with 250 timberwolf engine and swingarm. Wolf in DX clothing
Power User
Catch me if you can
Nice! I feel bad for all the guys that bought the used Hoosiers in that style, they didn't know they'd be remade...
Popular tire!
All our government does is distract us while they steal from us, misspend our tax $ and ruin our country
Just Too Addicted
Arm chair racerJust too addicted
Got the front tire mounted on the wheel this evening. Just trying to keep making forward progress and knocking out little sub projects
Sent from my SM-G988U using Tapatalk
1979 ATC110
1983 ATC110
1984 ATC110
1984 ATC125M
1985 ATC110 2 of them
1985 ATC110 The wife's
1987 ATC125M
1985 ATC250ES
1984 DX225 with 250 timberwolf engine and swingarm. Wolf in DX clothing
Got The Holeshot
Arm chair racerJust too addicted
lookin good, that swing arm is going to look amazing chromed. Glad to see someone else refer to buying parts in years ago. haha.
Rebuilding and riding trikes everyday and lovin every minute.
http://www.3wheelerworld.com/showthr...light=pipeline
Just Too Addicted
Arm chair racerJust too addicted
Little update, I got the swingarm back from chrome. I also had the shock rebuilt by Ron Elmore (aka rocket ron). I roughly assembled everything to get an idea of what I'm still missing and what needs to be powder coated.
The plating was done by Shelbyville plating. The parts I used is a RAD billet carrier with tapered bearings I picked up years ago, a durablue eliminator axle, Galfer blue brake hoses, BDT blue hose clamps, a white chain slider made by Louis Mielke (plan B racing) and white delrin pivot bushings made buy Bryan Mulligan.
I'm super pumped to make some forward progress on this project. It's taken lots of $$$$ to get to this point but this helps keep the motivation up. I hope you all enjoy!
Sent from my SM-G988U using Tapatalk
1979 ATC110
1983 ATC110
1984 ATC110
1984 ATC125M
1985 ATC110 2 of them
1985 ATC110 The wife's
1987 ATC125M
1985 ATC250ES
1984 DX225 with 250 timberwolf engine and swingarm. Wolf in DX clothing
Power User
Got the holeshot
Man that looks amazing.
Power User
Catch me if you can
Looking good!!!
It sucks to get old
New to the board
Arm chair racerNew to the board
Just read the whole thread, great to see it’s really starting to come together the swing arms looking great, I love all the old school parts you’ve managed to score, especially the front fork brace. Let ok’ing forward to this being completed.
Sent from my iPhone using Tapatalk
New to the board
Arm chair racerNew to the board
Just read the whole thread, great to see it’s really starting to come together the swing arms looking great, I love all the old school parts you’ve managed to score, especially the front fork brace
Sent from my iPhone using Tapatalk
Power User
Got the holeshot
86 200x is a great trike.Iv been getting mine fixed up to be more reliable. I had a Hella time getting a bearing carrier. Looked for one since I got it in 2018.I bought a new from Niche wich was wrong its for 86 250r. I bought a used one that was said to be 86 200x wich was again 86 250r. So I went to ebay and way over paid over 300 with shipping from Alaska. Took forever to finally get it.
250r rules
Reply With Quote
