I have need help can any one tell how to put my new cam in time. It is a web 362/362
Put cylinder and head on the motor. Ensure piston is at TDC. Put cam in, lobes down. Make sure to put some sort of grease on lobes and camshaft where it rides on the head journals and rear bushing. Also fill up the head pocket with the same oil you will put in the bike. Place cam gear and chain on shaft with the "0" at 12 o clock. Use 1211 bond, or equivalent (spread thin) on surface of head and rocker box. Torque rocker box to cinch cam in place. Tighten cam gear to cam 7-9 ft lbs. then, follow this.
http://www.3wheelerworld.com/showthr...tors-with-pics
What all is done to the motor? And the "grease" on your cam should be molybdenum.
I don't think it would be necessary for you to get a bigger carb. You could always try one a ways down the road if you feel like experimenting.
24mm stock will be fine. Disassemble carb, set it in berry chem for a 1-2 days, rinse with warm water and clean with toothbrush. I then bead blast them. If you can't bead blast then clean uber spotless with tooth brush and high pressure air. Then pick up a shindy rebuild kit and replace all components. Then go to jetsrus and pick up some genuine keihin main jets 118, 115, 112, 110, 108 and a 40 pilot. Start with 118, needle clip in middle position and 40 pilot. You will probably end up with a 115/112 main. Plug porcelain should look like a brown paper bag when jetted properly. Also, replace OEM filter with a oiled uni and use airbox lid. That should be ball park.
2nd pic in post 31 is your head back from CT ? You'll be happy with her when she's done. If I were you,I would put a pause on this,.get a degree wheel, research,research,research, learn how to use it, and then assemble your top end with it. You will pick up some ponies and have no hesitation everything is correct.
Please help those who cannot help themselves.
ALWAYS buying Museum quality machines,3 and 4 wheels. And any and ALL ,NOS parts,EVERY brand.
I am turning my PM's Off,my Email is billsracing@hotmail.com,put 3WW in the subject. Thanx!
Gun laws do not stop criminals. BULLETS do.
Thanks so much yaegerb. I will go ahead and order them .
No my head is not back yet it will be very soon . I'm also waiting on web cam to send my came back to me also I will post pic soon as it gets back . I'm veery seriously thinking about once all my parts are back take my engine to a shop in north Alabama and let a pro put it back in time. But then again yaegerb makes it sound easy .
If any one has ever put a different cam in there 200x. I would like to hear how u put it back in time .
I just bought this exhaust off eBay. I'm have it sand blasted and painted. Once it gets to my house . Can anyone one tell me what parts it is missing? If any