//ArrowChat Code
Results 1 to 6 of 6

Thread: 85' 250ES Carb rebuild Leftover washer- please help ID

  1. #1
    QCR77's Avatar
    QCR77 is offline Just Too Addicted Arm chair racerJust too addicted
    Join Date
    Aug 2009
    Location
    SA TX
    --
    538

    85' 250ES Carb rebuild Leftover washer- please help ID

    Lil sucker fell out at one point and i didnt see where it came from, i just found it laying there. came out of the carb, not from a kit. its about 1/16" thick and a little over an 8th inch in diameter. its not rounded on the edges, its very square edged. can go grab it and post a pic if neccessary. plan on putting everything back together tomorrow night. Help with ID would be much appreciated.

  2. #2
    Join Date
    May 2016
    Location
    OH Canada
    --
    1,102
    Not familiar with that carb myself but post a pic of it. I know it is hard to find a manual online
    -------------------------------------------------------------------------------------------------------------------------------------------------------------------

    '83 200X

    Chicks love guys that ride trikes

  3. #3
    Ranvier is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Sep 2016
    Location
    Phoenix, AZ
    --
    307
    FlyingW owns that carb. Pm him

  4. #4
    Join Date
    Dec 2008
    Location
    Monroe MI
    --
    5,787

  5. #5
    Join Date
    Dec 2008
    Location
    Monroe MI
    --
    5,787

  6. #6
    Join Date
    May 2009
    Location
    S.E. Michigan
    --
    1,250
    To me, it sounds like the washer that goes between the o-ring and the spring on the pilot screw (#22 in the parts diagram MonroeMike posted).
    - Frank

    1984 200ES Big Red
    1985 350X (x2)
    1986 350X
    1986 250SX
    1984 Auto-X
    1984 ATC70
    1985 ATC70

//ArrowChat Integreation Code //