Matt is making headway and I am ready for some more pictures...
Matt is making headway and I am ready for some more pictures...
I have made some good progress here. Unfortunately Photobucket seems to have stopped free 3rd party hosting of images, so I am going to have to find a new service for sharing pictures. I will be going through this thread and the Cagiva thread to get the images re-loaded. I'll try simply attaching them to the post for now. Over the last 2 weeks I was able to get the rear brake disk reground and get the entire axle assembly put together. Right now I am focusing on suspension. I have two sets of forks that I am using to make one nice set. They are disassembled and ready to be refinished. Still trying to figure out the rear suspension. I have a fox clicker shock that is 14" eye to eye, but not sure if it will get me the correct ride height. I'm going to try setting the front end up first and then dial the rear end in from there.
So with the kart tires, will you be taking it to Iowa?
As always, your builds are just above and beyond amazing! The sheer amount of patience and dedication you have is just astounding.
Thanks! This will be an outdoor TT / FT trike. There is no way that i would race this out at the Battle at the Barn. It is not a place to be taking really nice trikes. I have my Tri-z for that race.
* 1978 ATC 90/180 Pauter PJ1 / Springer "Team BAPP" Bike *
* 1980 ATC 110/180 "Danny's Machine Works" 3D Sprint Dune Bike *
* Nicholson 500 Race Bike *
* HPATC Yamaha RD350 "Big Moe" Trike *
This thing gets more beautiful with every post!
RIP - Yamahondaman!! You will never be forgotten!
RIP - Sam Brehm!! Gone but NEVER forgotten!
RIP - Sandpuppi101 - You will live on in my mind - I miss you friend!
Thanks guys. The front tire is a NOS Goodyear I picked up several years ago. No idea if they are still made or not. I can get the specs on it when I am back in the garage this weekend.
Oh man, Let's get that beautiful motor in it. Are you going to chrome that Cone pipe?
Made some more headway on this project. The shock is now installed and the Cammex is a roller. I ended up going with the Fox Clicker shock and was able to get it configured nicely. Schmidty Racing Suspensions did the refinishing and knocked it out of the park with the chrome and polish work.
Awesome build
Sent from my Z958 using Tapatalk
I second that it one hell of a nice build the way it's looking it almost to nice to race
If its on the internet its got to be true they can't put any lie's on the internet