//ArrowChat Code
Page 2 of 2 FirstFirst 1 2
Results 16 to 21 of 21

Thread: Jetting 84 250r

  1. #16
    Join Date
    Apr 2014
    Location
    Australia
    --
    580
    Yes it been rebuilt not long ago and yes I can blow through the gas cap.


    Sent from my iPhone using Tapatalk

  2. #17
    Join Date
    Mar 2017
    Location
    Oklahoma
    --
    77
    I’ve been working on my jetting also, live in OK at 1500 ft. Stock engine full dg exhaust uni filter with airbox and holes in the lid. 138 main was too lean so I’m going to a 150 and do a plug chop. Honda synthetic oil at 32-1.

  3. #18
    Join Date
    Mar 2017
    Location
    Oklahoma
    --
    77
    I’ve been working on my jetting also, live in OK at 1500 ft. Stock engine full dg exhaust uni filter with airbox and holes in the lid. 138 main was too lean so I’m going to a 150 and do a plug chop. Honda synthetic oil at 32-1.

  4. #19
    oldoo's Avatar
    oldoo is offline At The Back Of The Pack Arm chair racerFirst time rider
    Join Date
    May 2017
    Location
    Australia
    --
    155
    Let me know what your results are Ivan, and ill jet mine accordingly after the same mods ahah

  5. #20
    Join Date
    Apr 2017
    Location
    Vancouver Washington
    --
    5
    Thanks for asking this question! I'm trying to dial in the jetting on my '84 also

  6. #21
    Join Date
    Apr 2014
    Location
    Australia
    --
    580
    Quote Originally Posted by oldoo View Post
    Let me know what your results are Ivan, and ill jet mine accordingly after the same mods ahah
    I just went two sizes up on the main and pilot from stock and that worked!


    Sent from my iPhone using Tapatalk

//ArrowChat Integreation Code //