1984 YTM restoration

[Powerstroketech]

I'm completely new to forums, and had a friend suggest I try it out. I am doing a complete rebuild/restore on a 1984 YTM 200 chain. Any suggestions on getting the decals that are correct? I can only find the shaft drive ones or sets that may belong on a different year model... thanks!

[njcycleguy]

Try eBay.. I've had great luck finding parts for my 250r there.

[ATCeeya]

http://www.ebay.com/itm/YAMAHA-YTM20...eZKAOw&vxp=mtr

Welcome to 3WW homie

You'll have to start a build thread and post pics in trikesylvania

[Powerstroketech]

Thanks! I know... have lots of good pics now. Frames being sent out shortly, debating powder coat or base and clear

[ATCeeya]

Hmmm paint or powder.....Either way I'm jealous

[Powerstroketech]

Also... heat gun, no matter what temperature setting darkens the yellow plastic. What worked FAR better is 320,400,600,800,1000,2500, 5000 wet sanding, rubbing compound at 1500 rpm and a nice coat of wax and buff.

[DailyGrind]

Also... heat gun, no matter what temperature setting darkens the yellow plastic. What worked FAR better is 320,400,600,800,1000,2500, 5000 wet sanding, rubbing compound at 1500 rpm and a nice coat of wax and buff.

pics or it didnt happen

[Powerstroketech]

Sent from my iPhone using Tapatalk

[Powerstroketech]

Sent from my iPhone using Tapatalk

[350for350]

Well I believe you! Those look good.

[Powerstroketech]

retired the box, now its going to be my home base for trike/wheeler builds


Sent from my iPhone using Tapatalk

[Powerstroketech]

Sent from my iPhone using Tapatalk

[Powerstroketech]

Prep, prime base n cleared twice


Sent from my iPhone using Tapatalk