85 250sx. Need to adjust my valves. How do you get the caps out? Thanks
85 250sx. Need to adjust my valves. How do you get the caps out? Thanks
Remove the two 6mm bolts and pop the cap off . Have at it lol !
78 atc 90/180cc Dickson Full Suspension
76 ATC90/180cc Nicholson
77 atc 90 Dickson Full Suspension
84 KLT 110/123cc Powroll Racer from 80s
87 atc 125m stock
84 atc 200x Curtis Sparks
84 atc 200x Powroll My race bike from 80's
83 atc70/108cc Powroll blue Xmas Special
81 atc185s HP-ATC full suspension
Performance Shop is Open PM me for Service
My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10
I meant the rotor cap and timing cap on the side case. Not the valve covers. Looks like giant flat head screw driver bolts lol. I honestly skipped finding the t spot and just wiggled the rocker arm while moving the kicker till I felt some play.
If their stuck I use a small punch to tap it loose .
Another method I use is to remove the spark plug , insert a long screw driver in the plug hole and put the piston at TDC also making sure the cam lobes are pointed down and then your good to adjust the valves .
Last edited by shortline10; 06-21-2017 at 05:39 PM.
78 atc 90/180cc Dickson Full Suspension
76 ATC90/180cc Nicholson
77 atc 90 Dickson Full Suspension
84 KLT 110/123cc Powroll Racer from 80s
87 atc 125m stock
84 atc 200x Curtis Sparks
84 atc 200x Powroll My race bike from 80's
83 atc70/108cc Powroll blue Xmas Special
81 atc185s HP-ATC full suspension
Performance Shop is Open PM me for Service
My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10
1985 ATC125M: Parts
1985 ATC200S: 84 200S Bottem end, 200x Head, 200x Carb, S&S Cycle Exhaust, Wiseco 10.25:1 Piston, Reground Cam with About 1mm more lift(unknown specs).
1988 TRX250X
1983 ATC200E: Total Pile.
"Bout Tree Fiddy" Master of Thy 22RE
If you like buying tools, try this:
https://www.motionpro.com/product/08-0087
I have it and it works perfectly.
- Frank
1984 200ES Big Red
1985 350X (x2)
1986 350X
1986 250SX
1984 Auto-X
1984 ATC70
1985 ATC70
Awesome. Thanks wonderboy
I've run into further issues after valve adjustment. Thought I had them right on the button, for I started it and ran it for a little and heard zero chatter from the top end. Gauged both intake and exhaust at .003". It didn't make any noise till later in the day I started it again and let it idle for about 5 minutes when all of a sudden the top end chatter returned just like that out of nowhere. It's torn back down now, any suggestions?
Probably time for a timing chain .
78 atc 90/180cc Dickson Full Suspension
76 ATC90/180cc Nicholson
77 atc 90 Dickson Full Suspension
84 KLT 110/123cc Powroll Racer from 80s
87 atc 125m stock
84 atc 200x Curtis Sparks
84 atc 200x Powroll My race bike from 80's
83 atc70/108cc Powroll blue Xmas Special
81 atc185s HP-ATC full suspension
Performance Shop is Open PM me for Service
My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10
I have a top quality, sharp, cold chisel, she'll tap out anything stripped like it's new. Plug,bolt or nut. I could field strip a whole bike with it and a But only in a pinch. Try it !
Please help those who cannot help themselves.
ALWAYS buying Museum quality machines,3 and 4 wheels. And any and ALL ,NOS parts,EVERY brand.
I am turning my PM's Off,my Email is billsracing@hotmail.com,put 3WW in the subject. Thanx!
Gun laws do not stop criminals. BULLETS do.