That will help some.
Here is a closer look at what I built. Everything will be welded together using square tubing and flat stock, and where the shaft goes through the "frame" there will be 2 carrior bearings built into it. The shocks will be supported by steel and framed in with the rest .
Sent from my LGL64VL using Tapatalk
I actually got the black waters for my warrior for grass drags, I want paddle tires like the ones in your second pic
Sent from my LGL64VL using Tapatalk
The V paddles are for my Tecate4. The straight ones at the bottom are pretty worn. I got those for cheap from someone at the Midwest trike Rampage in 2013. I can't remember who from. Maybe jb2wheels? In the box, is a pair of aftermarket 400ex rims that are on my 350x right now and the tires in plastic are the Cheng Shin c828 Lumberjacks that are on the back on my YTM225.
Thanks again for the info !!!
Here is a random pic I took today of the 3 wheeler with the moto 4 250 rear fenders.
The swing arm bearings are shot in the 250.
Sent from my LGL64VL using Tapatalk
Those fenders look like they were made for the trike.
They fit perfect other than the cobra pipe hits the rubber
Sent from my LGL64VL using Tapatalk
The 2 heads I have are different, or something is missing on one ?
Sent from my LGL64VL using Tapatalk
Yes. The first one doesn't have a rocker shaft or arms.
And 4 bolts snapped off of it. That is the head I got with it so I'm going to use the one I bought
Sent from my LGL64VL using Tapatalk
Good idea.
The top end gasket kit came in on Thursday so I'm hoping to have it together this weekend
Sent from my LGL64VL using Tapatalk