First Time Rider
Arm chair racerNew to the board
Can anyone tell me how the Hondaline Rack connects to the grab bar? Mine just had a bolt through the U shaped clamp on the rack. I just had the rack and grab bar powder coated. It seems like there should be a grommet or rubber coating to keep it from getting scratched when the rack is rotated up.
Sent from my Pixel XL using Tapatalk
Just Too Addicted
Arm chair racerJust too addicted
There are thin plastic bushings that go between grab bar and rack bolt mounts.
Chris
First Time Rider
Arm chair racerNew to the board
I am going to bump my very old thread.
Does anyone know of a suitable replacement part for the plastic bushings on a '87 250SX with a hondaline rack?
Just Too Addicted
Arm chair racerJust too addicted
I think I used pieces of a milk jug, or maybe some old 200es fork bushings. Either way they’ve held up just fine
Chris
Power User
Catch me if you can
Show me a picture of where it goes/what it does, and I'll show you a replacement...
All our government does is distract us while they steal from us, misspend our tax $ and ruin our country
First Time Rider
Arm chair racerNew to the board
Here is a picture of what I am talking about. The rack swivels on the grab bar and since I just had them both powder coated I would like something there to rotate on and keep the rack from scratching the grab bar.
Putting Priorities in Order, Busier than ever.
Catch me if you can
Do you have a old bike tube laying around? If so cut a piece of it and wrap it around. I have done this many times. On some you need to have 2 layers to fill the void and make it snug.
Howdy
Power User
Catch me if you can
I've split plastic pipe to make them. Go to Home Depot and check the water and electrical selection for sizes.
It sucks to get old
First Time Rider
Arm chair racerNew to the board
Ok, looks like there are lots of options for replacements. Thanks for all the suggestions.
Just Too Addicted
Arm chair racerJust too addicted
I used the rubber bushings from between the front bumper and front rack of a 1986 TRX250.
15T3FN1 CE/FI/SI with a Class A; Some of you might know what that means.
1986 ATC 200x, Gathering parts for a 200sx build.
1985 ATC 250SX 25" tires, extended swingarm, snorkel and other mods for Alaska adventures.
1985 ATC 250SX, Big plans for this one...
1985 ATC 250ES, Big Red
1984 ATC 125M's, 1.5 of 'em
1983 ATC 110, BLUE!
1974 ATC 70 Pink?
Power User
The day begins with 3WW
IDK, But I assume the bushings are still available for a 2000 TRX 300, they would be Honda,and very close fitment.
Please help those who cannot help themselves.
ALWAYS buying Museum quality machines,3 and 4 wheels. And any and ALL ,NOS parts,EVERY brand.
I am turning my PM's Off,my Email is billsracing@hotmail.com,put 3WW in the subject. Thanx!
Gun laws do not stop criminals. BULLETS do.
Power User
Roostin Away
KLF 220 rear rack mounts would probablywork
Reply With Quote