//ArrowChat Code
Results 1 to 4 of 4

Thread: My 250es

  1. #1
    Join Date
    Feb 2017
    Location
    Paragould
    --
    63

    My 250es

    So when I got my Big red the breaks worked great but I have been mudding and in some deep water a few times and have stopped working. Anyone know how I could fix this?


    Sent from my iPhone using Tapatalk

  2. #2
    125Mmadness's Avatar
    125Mmadness is offline At The Back Of The Pack Arm chair racerFirst time rider
    Join Date
    Apr 2017
    Location
    McConnelsville,Oh
    --
    157
    Is there any resistance when pushing on the pedal or pulling the lever?
    1985 ATC125M: Parts
    1985 ATC200S: 84 200S Bottem end, 200x Head, 200x Carb, S&S Cycle Exhaust, Wiseco 10.25:1 Piston, Reground Cam with About 1mm more lift(unknown specs).
    1988 TRX250X
    1983 ATC200E: Total Pile.


    "Bout Tree Fiddy" Master of Thy 22RE

  3. #3
    Join Date
    Apr 2014
    Location
    Edmond, KS
    --
    2,531
    Maybe your cables froze up. Maybe something inside your brake drums froze up. Mud is hard on brake pads and shoes. Maybe the lining on your shoes is gone. I'd do a little checking.

  4. #4
    briano is offline Got The Holeshot Arm chair racerJust too addicted
    Join Date
    May 2010
    Location
    Michigan UP
    --
    1,005
    Start with checking the brakes since they're not working. Only logical place to start I'd say. It's definitely not going to be the starter.

//ArrowChat Integreation Code //