We will see if the warrior axle works
Sent from my XT1635-01 using Tapatalk
We will see if the warrior axle works
Sent from my XT1635-01 using Tapatalk
[/SIGPIC]
85 350x
83 200x-sold
×2 85 200x-sold
06 kx250f-sold
86 tecate-sold
86 tri z powervalved
85 BIG red
18 rmz250
87 lt80
19 ttr110
The Banshee axle works on the Z. Tusk makes a good extended axle for only $200--at least that is what I paid a few years ago. Regarding the Z shock, they are completely rebuildable. I rebuilt mine a few years ago and did a write up (see link). If you use the Warrior shock, you could always replace its reservoir with the Z reservoir, that way you avoid fitment issues.
http://www.3wheelerworld.com/showthr...new-seal-head)
I didn't go the Tusk route.... but, I did do the Banshee axle (Dominator II) and I can also confirm everything fits perfect. The only thing that didn't for me, is I went with Banshee wheels and they are a different bolt pattern... which I didn't know until I tried to mount the wheels to the stock Z hubs. After it was all said and done, I ended up with everything on the back (except for shock and swingarm) were replaced with Banshee stuff
1983 Selvy 300R - Check out the Build Thread
1985/86 Tri-Z - Build Thread Coming Soon
1985 Tri-Z
1986 250sx
1985 ATC70
1985 ATC 200M
Youtube Channel "Lowe Off Road"
- Brandon
Lol.... gotta love neighbors! Why did they get pissed off?
1983 Selvy 300R - Check out the Build Thread
1985/86 Tri-Z - Build Thread Coming Soon
1985 Tri-Z
1986 250sx
1985 ATC70
1985 ATC 200M
Youtube Channel "Lowe Off Road"
- Brandon
[/SIGPIC]
85 350x
83 200x-sold
×2 85 200x-sold
06 kx250f-sold
86 tecate-sold
86 tri z powervalved
85 BIG red
18 rmz250
87 lt80
19 ttr110
So warrior axle is a lot thicker doesn't work.
Sent from my XT1635-01 using Tapatalk
[/SIGPIC]
85 350x
83 200x-sold
×2 85 200x-sold
06 kx250f-sold
86 tecate-sold
86 tri z powervalved
85 BIG red
18 rmz250
87 lt80
19 ttr110
http://www.3wheelerworld.com/showthr...with-TRI-Z-250
The road has already been layed out for you. Read this post keep it for the future. If your thinking of rebuilding a Tri Z
This post is your Bible.
[/SIGPIC]
85 350x
83 200x-sold
×2 85 200x-sold
06 kx250f-sold
86 tecate-sold
86 tri z powervalved
85 BIG red
18 rmz250
87 lt80
19 ttr110
Ok, you didn't see it because it doesn't fit. The fact that guys with 30+yrs of experance have been there & done that freely tell those that need help...sometimes doesn't sink in. You explore the Yamaha Universe and lets us know when you discover something new. Don't forget to post it for the rest of us. Good luck with your build.
A member asked about it so I checked. Who knows if anyone has tried one before in a z. So now we know for sure it doesn't work. Just because it's not on there doesn't mean anything. There's a chance nobody has tried it or have tried it. Was just confirming it. Don't know why you're trying to knock me down on this.
Sent from my XT1635-01 using Tapatalk
[/SIGPIC]
85 350x
83 200x-sold
×2 85 200x-sold
06 kx250f-sold
86 tecate-sold
86 tri z powervalved
85 BIG red
18 rmz250
87 lt80
19 ttr110