First Time Rider
Arm chair racerNew to the board
dusted off my R.. and wouldn't ya know, no brakes lol anyways, got rear shoes on order, but I need to bleed my front brake, and my bleeder is mangled, so going to replace it. Don't wanna have to wait for the OE honda one, so just going to get a dorman / motormite off the shelf from my work.. but I need to know what size the threads are, as I don't want to be dead in the water after I get the other one out.. anyone know the size?
Power User
The day begins with 3WW
You can also just bleed it at the banjo bolt .
78 atc 90/180cc Dickson Full Suspension
76 ATC90/180cc Nicholson
77 atc 90 Dickson Full Suspension
84 KLT 110/123cc Powroll Racer from 80s
87 atc 125m stock
84 atc 200x Curtis Sparks
84 atc 200x Powroll My race bike from 80's
83 atc70/108cc Powroll blue Xmas Special
81 atc185s HP-ATC full suspension
Performance Shop is Open PM me for Service
My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10
First Time Rider
Arm chair racerNew to the board
I could, but since it might be on the "restore" list in the near future, figured replace things that are wrong as I go, oh and fyi got an answer, its either 7mm - 1.0 or 8-1.25 looks like those are the only two pitches possible.. I got both, we'll see...
First Time Rider
Arm chair racerNew to the board
got my answer, its m8-1.25 used a $2 off the shelf bleeder, works great..
Reply With Quote