//ArrowChat Code
Results 1 to 2 of 2

Thread: BW350R RD350 Fat Cat project

  1. #1
    Join Date
    Jan 2006
    Location
    Huntersville, NC
    --
    106

    BW350R RD350 Fat Cat project

    Well I got working on an old project again it has been 4 years in the making if that tells you how back burner I’m talkin.

    I took a bw 200 swing arm, shoehorned it in to a 75 rd350 frame put new bearings, new jack shaft and all, put the bw 200 front end on and replaced the forks with 200x for front disc. Recently I made a 2 into 1 pipe and and installed an upswept expansion chamber.

    After finding my clutch had stuck for sitting so long I decided to get a banshee set, I also got some bowl gaskets to stop the 42 yr old dried out gasket leak.

    what a dam beast. Now to get a tank and modify it to fit the forks. Mine was so dented I just bashed in the rest to ride. But it’s a leaker.





    10 Buy it
    20 Beat it
    30 Break it <----- Sometimes this is the end of the routine
    40 Fix it
    50 Sell it
    60 Goto 10

    Current
    1985 @TC 350x, 1986 @TC 600x <---need to make a 250r into a 500r next.

    Past
    81 KLT 200 ,82 ATC 185S Restored, 84 Tri Moto 125,
    84 200es Big Red, 85 250es Big Red
    85 1/2 TRI-Z 250 Fully Restored 2nd place in competition @ Metrolina bike show March 2011
    85 350x, 86 350x
    86 250r Restored ,87 250es Big Red, 87 200x Restored

  2. #2
    fabiodriven's Avatar
    fabiodriven is offline Aspiring romance novel cover model, and the Official 3WW slayer of thieves and swindlers. Catch me if you can
    Join Date
    Jun 2008
    Location
    The woods
    --
    10,515
    I'm looking forward to seeing the progress and some more pictures.
    85 Tri-Zinger 60
    85 ATC250SX
    86 ATC250SX
    87 ATC250SX
    02 XR650L conversion
    84 ATC 480R

//ArrowChat Integreation Code //