I have a 250r that idles great but when you go to take off it Boggs down any ideas as too why this is
Sent from my SM-G955U using Tapatalk
I have a 250r that idles great but when you go to take off it Boggs down any ideas as too why this is
Sent from my SM-G955U using Tapatalk
Is it jet properly? Main jet?
Sent from my iPhone using Tapatalk
Clogged carb , bad jets, improper jetting, fouled plug , bad reefs, dirty air filter , I’d start with the easy stuff. New plug and disassemble the carb and clean it. Clean filter while your there. See what happens.
Sent from my iPhone using Tapatalk
Try replacing the coil.
250r rules
Check airflow. Make sure the intake is clear.
Heard a tail of a mouse nest in the exhaust restricting flow. Engine is just a air pump.
-------------------------------------------------------------------------------------------------------------------------------------------------------------------
'83 200X
Chicks love guys that ride trikes
Raise your needle clip one notch and see if t gets better.
@truckerlump
You are going to get a lot of good advice here...the more you become familiar with your trike, the better troubleshooting will be. Personally, whenever I get any used motor, whether it's a vehicle, boat or trike, regardless of what the previous owner had said he had done to it, I will always go through basic maintenance to alleviate any unknowns (clean the carb, change the oil, filter, etc.). For now, it starts so that is a good thing, but go through the basics and this should point you in the right direction.
http://www.3wheelerworld.com/showthr...Jetting-Theory
Step by step,,,