//ArrowChat Code
Results 1 to 7 of 7

Thread: 250sx/200x front end

  1. #1
    Join Date
    Feb 2015
    Location
    new york
    --
    86

    250sx/200x front end

    doing the 200x front end conversion on my 85 250sx.where do the steering stops get welded onto the neck.not really sure how to space them out???also will the 250sx bearings work or do I need 200x bearings or are they the same???

  2. #2
    Join Date
    Feb 2015
    Location
    new york
    --
    86
    can anyone send me in the right direction on this.a link or something any info.

  3. #3
    Join Date
    Apr 2014
    Location
    Edmond, KS
    --
    2,531
    I wish I could help, but the 200X front end was already on mine when I bought it. If I remember, the bearings are the same.

  4. #4
    Join Date
    Nov 2015
    Location
    Calgary Alberta Canada
    --
    29
    Click image for larger version. 

Name:	IMG_0311.JPG 
Views:	28 
Size:	2.33 MB 
ID:	247924Click image for larger version. 

Name:	IMG_0312.JPG 
Views:	31 
Size:	2.12 MB 
ID:	247925Click image for larger version. 

Name:	IMG_0314.JPG 
Views:	26 
Size:	2.01 MB 
ID:	247926Click image for larger version. 

Name:	IMG_0313.jpg 
Views:	22 
Size:	1.42 MB 
ID:	247927I did this conversion on the girlfriends bike. Wish I had pictures on this phone. What I did was put the tripples on the bike and welded the stops about a 1/4 inch before the tripples hit the tank. I'll go take some photos. Hope this helps?

//ArrowChat Integreation Code //