Bought a basketcase last night. Guy said had it running a month ago before he rebuilt the bottom end. No spark now but after looking it over more it has some major problems. Hacked up wiring harness for starters. Starter has the main wire going in where can pull it out. No idea how it turned over with the starter last night but it did. Numbers on the engine are TB05E-6033019 which if am reading it right says is a 83 200X. The carb hits the crossmember so they cut one side loose with a grinder and pried it up to clear the top of the carb. I am in hopes someone can enlighten me what I am dealing with other then someone else's mess. The VIN says is a 200 made in 84. I have rewired my 77 FXE Shovelhead with no problem once I found a schematic.
The transmission will need some TLC as well the bolt broke off so they welded the shifter to the shaft. There is no pull rope stater and tranny says it has reverse. Where the pull rope mounts is a small splined shaft as well I have no idea what it is for. I have purchased a shop manual for an 84 but not here yet. Any help is greatly appreciated.